Smart Meter just installed

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

Smart Meter just installed

steve
I just had a Smart Meter installed today for my apartment building. The Meter is outside my bathroom (though I am on the 2nd floor so its lower down). My bedroom is about 12 feet away from it.
I'm not happy about this of course but i guess I will see if it affects me.
Oh joy.

Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

Loni Rosser
Oh wow, please keep us informed! It's just terrible this is forced on us!
 
Loni

--- On Wed, 9/29/10, torch369 <[hidden email]> wrote:


From: torch369 <[hidden email]>
Subject: [eSens] Smart Meter just installed
To: [hidden email]
Date: Wednesday, September 29, 2010, 6:12 PM


 



I just had a Smart Meter installed today for my apartment building. The Meter is outside my bathroom (though I am on the 2nd floor so its lower down). My bedroom is about 12 feet away from it.
I'm not happy about this of course but i guess I will see if it affects me.
Oh joy.









     

[Non-text portions of this message have been removed]

Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

gjohnson
In reply to this post by steve
  I had a Smart Meter installed at my house in Colorado last week. It is
made by Elster, Type REX2-EA, although the face reads Type R2S. It uses
the 900 MHz band and cell phone technology. The Tech told me that it is
low power, with a maximum range of about 1/10 mile. It operates in a
Daisy Chain fashion, such that it sends information to my neighbor's
meter, which then sends the information on to the next neighbor, and so
on until the message reaches a more powerful unit which is able to call
the utility company.

The Tech assured me that the meter only calls out once a day or so, to
report status. The utility can also call in, to request energy usage and
status (Are the lights on?) but will not do that more than perhaps once
a day.

The FCC requires that any new transmitter not interfere with any
existing application. The utility will be concerned about the power
usage, not wanting to add load to its power system that it might not be
able to bill. Both constraints are met by a low-powered transceiver that
is operated very briefly only a few times a day. Such a Smart Meter
'should' be less bothersome to we sensitives than a cell phone operating
within perhaps 50 or 100 feet of our location. We can always hope!

Gary Johnson

On 9/29/2010 7:12 PM, torch369 wrote:

> I just had a Smart Meter installed today for my apartment building. The Meter is outside my bathroom (though I am on the 2nd floor so its lower down). My bedroom is about 12 feet away from it.
> I'm not happy about this of course but i guess I will see if it affects me.
> Oh joy.
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

stephen_vandevijvere
> The Tech assured me that the meter only calls out once a day or so, to
> report status. The utility can also call in, to request energy usage and
> status (Are the lights on?) but will not do that more than perhaps once
> a day.

I suppose you can easily check with a high freq. emf meter if the "smart meter" sends 24/7 or not?



--- In [hidden email], Gary Johnson <gjohnson@...> wrote:

>
>   I had a Smart Meter installed at my house in Colorado last week. It is
> made by Elster, Type REX2-EA, although the face reads Type R2S. It uses
> the 900 MHz band and cell phone technology. The Tech told me that it is
> low power, with a maximum range of about 1/10 mile. It operates in a
> Daisy Chain fashion, such that it sends information to my neighbor's
> meter, which then sends the information on to the next neighbor, and so
> on until the message reaches a more powerful unit which is able to call
> the utility company.
>
> The Tech assured me that the meter only calls out once a day or so, to
> report status. The utility can also call in, to request energy usage and
> status (Are the lights on?) but will not do that more than perhaps once
> a day.
>
> The FCC requires that any new transmitter not interfere with any
> existing application. The utility will be concerned about the power
> usage, not wanting to add load to its power system that it might not be
> able to bill. Both constraints are met by a low-powered transceiver that
> is operated very briefly only a few times a day. Such a Smart Meter
> 'should' be less bothersome to we sensitives than a cell phone operating
> within perhaps 50 or 100 feet of our location. We can always hope!
>
> Gary Johnson
>
> On 9/29/2010 7:12 PM, torch369 wrote:
> > I just had a Smart Meter installed today for my apartment building. The Meter is outside my bathroom (though I am on the 2nd floor so its lower down). My bedroom is about 12 feet away from it.
> > I'm not happy about this of course but i guess I will see if it affects me.
> > Oh joy.
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>


Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

Marc Martin
Administrator
> I suppose you can easily check with a high freq. emf meter if the "smart
> meter" sends 24/7 or not?

Maybe an AM radio would be a cheaper alternative to a high frequency
EMF meter?

Marc
Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

steve
In reply to this post by Loni Rosser
I know. I was nauseous yesterday when i woke up but it was probably just a coincidence because I'm not sick today. I had a wrist injury, hurt in my sleep believe it or not, and the pain was excruciating, so i think that was what made me feel ill.
The Meter hasn't affected my sleep, yet.

--- In [hidden email], Loni <loni326@...> wrote:

>
> Oh wow, please keep us informed! It's just terrible this is forced on us!
>  
> Loni
>
> --- On Wed, 9/29/10, torch369 <torch369@...> wrote:
>
>
> From: torch369 <torch369@...>
> Subject: [eSens] Smart Meter just installed
> To: [hidden email]
> Date: Wednesday, September 29, 2010, 6:12 PM
>
>
>  
>
>
>
> I just had a Smart Meter installed today for my apartment building. The Meter is outside my bathroom (though I am on the 2nd floor so its lower down). My bedroom is about 12 feet away from it.
> I'm not happy about this of course but i guess I will see if it affects me.
> Oh joy.
>
>
>
>
>
>
>
>
>
>      
>
> [Non-text portions of this message have been removed]
>


Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

steve
In reply to this post by gjohnson
From what I've heard the Meters send a pulse every 15 minutes or so right to the base station. I hope you have the right info, though, since I would rather have it work the way you say. I don't see how that is possible though since they would need the info throughout the day or what's the point of the Meter?

--- In [hidden email], Gary Johnson <gjohnson@...> wrote:

>
>   I had a Smart Meter installed at my house in Colorado last week. It is
> made by Elster, Type REX2-EA, although the face reads Type R2S. It uses
> the 900 MHz band and cell phone technology. The Tech told me that it is
> low power, with a maximum range of about 1/10 mile. It operates in a
> Daisy Chain fashion, such that it sends information to my neighbor's
> meter, which then sends the information on to the next neighbor, and so
> on until the message reaches a more powerful unit which is able to call
> the utility company.
>
> The Tech assured me that the meter only calls out once a day or so, to
> report status. The utility can also call in, to request energy usage and
> status (Are the lights on?) but will not do that more than perhaps once
> a day.
>
> The FCC requires that any new transmitter not interfere with any
> existing application. The utility will be concerned about the power
> usage, not wanting to add load to its power system that it might not be
> able to bill. Both constraints are met by a low-powered transceiver that
> is operated very briefly only a few times a day. Such a Smart Meter
> 'should' be less bothersome to we sensitives than a cell phone operating
> within perhaps 50 or 100 feet of our location. We can always hope!
>
> Gary Johnson
>
> On 9/29/2010 7:12 PM, torch369 wrote:
> > I just had a Smart Meter installed today for my apartment building. The Meter is outside my bathroom (though I am on the 2nd floor so its lower down). My bedroom is about 12 feet away from it.
> > I'm not happy about this of course but i guess I will see if it affects me.
> > Oh joy.
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>


Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

Loni Rosser
Yes it makes more sense that it is checking throughout the day because how would they measure the useage with just once per day? Loni

--- On Fri, 10/1/10, torch369 <[hidden email]> wrote:


From: torch369 <[hidden email]>
Subject: [eSens] Re: Smart Meter just installed
To: [hidden email]
Date: Friday, October 1, 2010, 7:50 AM


 



From what I've heard the Meters send a pulse every 15 minutes or so right to the base station. I hope you have the right info, though, since I would rather have it work the way you say. I don't see how that is possible though since they would need the info throughout the day or what's the point of the Meter?

--- In [hidden email], Gary Johnson <gjohnson@...> wrote:

>
> I had a Smart Meter installed at my house in Colorado last week. It is
> made by Elster, Type REX2-EA, although the face reads Type R2S. It uses
> the 900 MHz band and cell phone technology. The Tech told me that it is
> low power, with a maximum range of about 1/10 mile. It operates in a
> Daisy Chain fashion, such that it sends information to my neighbor's
> meter, which then sends the information on to the next neighbor, and so
> on until the message reaches a more powerful unit which is able to call
> the utility company.
>
> The Tech assured me that the meter only calls out once a day or so, to
> report status. The utility can also call in, to request energy usage and
> status (Are the lights on?) but will not do that more than perhaps once
> a day.
>
> The FCC requires that any new transmitter not interfere with any
> existing application. The utility will be concerned about the power
> usage, not wanting to add load to its power system that it might not be
> able to bill. Both constraints are met by a low-powered transceiver that
> is operated very briefly only a few times a day. Such a Smart Meter
> 'should' be less bothersome to we sensitives than a cell phone operating
> within perhaps 50 or 100 feet of our location. We can always hope!
>
> Gary Johnson
>
> On 9/29/2010 7:12 PM, torch369 wrote:
> > I just had a Smart Meter installed today for my apartment building. The Meter is outside my bathroom (though I am on the 2nd floor so its lower down). My bedroom is about 12 feet away from it.
> > I'm not happy about this of course but i guess I will see if it affects me.
> > Oh joy.
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>









     

[Non-text portions of this message have been removed]

Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

Marc Martin
Administrator
In reply to this post by steve
> I don't see how that is
> possible though since they would need the info throughout the day or
> what's the point of the Meter?

The point of the meter is to replace the guy who comes by to read
the meter each month.  So really it should only need to send
a signal once per month!

Marc
Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

steve
The guy still comes by, so thats not the reason. Its supposed to magically save energy somehow or give them more info to go by for peak hours or some crap like that.
It's an Obama thing.

--- In [hidden email], "Marc Martin" <marc@...> wrote:

>
> > I don't see how that is
> > possible though since they would need the info throughout the day or
> > what's the point of the Meter?
>
> The point of the meter is to replace the guy who comes by to read
> the meter each month.  So really it should only need to send
> a signal once per month!
>
> Marc
>


Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

Marc Martin
Administrator
> The guy still comes by, so thats not the reason. Its supposed to
> magically save energy somehow or give them more info to go by for peak
> hours or some crap like that.

Oh, this is a completely different type of meter than has been reported
about in the past, isn't it?  You'll have to let us know what health
problems it causes, if any...

Marc
Reply | Threaded
Open this post in threaded view
|

Re: Smart Meter just installed

steve
I will. I am definitely keeping an eye on it
Steve

--- In [hidden email], "Marc Martin" <marc@...> wrote:

>
> > The guy still comes by, so thats not the reason. Its supposed to
> > magically save energy somehow or give them more info to go by for peak
> > hours or some crap like that.
>
> Oh, this is a completely different type of meter than has been reported
> about in the past, isn't it?  You'll have to let us know what health
> problems it causes, if any...
>
> Marc
>