Hey everyone,
I could have sworn that some time ago I read about some kind of device that could be attached to or installed in DECT phones, which would stop them from radiating until they were in use, essentially disabling their "always on" technology, so they don't emit RF 24/7. Am I mistaken, or does such a thing exist, and if it does, how much does it cost, and would it work with phones for the North American market? Thanks a bunch! R. |
Hello,
I have published that in the german issue of *het bitje* Augustus 2005. An illustration stands on page 3. The manufacturor stopped the development, because there were two problems. 1. It worked fine. It stopped the current to the base station, and there was no radiation. So far so good. However, if you wanted to start a call, you had to go to the box and press a button, in order to establish a connection between the phone ande the base station. 2. For connecting the current from the box to the base station, it appeared, that several differnet Voltages were needed, and the biggest problem was, that there were also different plugs (round, square, etc.) For the DECT, there are three alternatives in Europe, where they work in the frequency band of 1880-1900 MHz, where I believe that in the USA 5.8 GHz is used. 1. One can bay an analogue cordless phone, till the end of 2008 available. 2. There are socalled DECT Eco mode types. They do not emit, as long as the phone stays in the craddle. But the use of a cordless phone is, that the phone may lie soemwhere else nearby, so the base station is emitting. 3. There is a new development, where they emit at very low emission levels (in Switzerland), and some according to the distance to the base station, so when farther away, the stronger the signal. Greetings, Charles Claessens member Verband Baubiologie www.milieuziektes.nl www.milieuziektes.be www.hetbitje.nl checked by Bitdefender ----- Original Message ----- From: "rticleone" <[hidden email]> To: <[hidden email]> Sent: Saturday, January 26, 2008 00:30 Subject: [eSens] DECT 'Interrupter"? (Constant signal stopper) > Hey everyone, > > I could have sworn that some time ago I read about some kind of device > that could be attached to or installed in DECT phones, which would > stop them from radiating until they were in use, essentially disabling > their "always on" technology, so they don't emit RF 24/7. > > Am I mistaken, or does such a thing exist, and if it does, how much > does it cost, and would it work with phones for the North American market? > > Thanks a bunch! > > R. > > > > > Yahoo! Groups Links > > > > |
In reply to this post by R. Ticle
In a message dated 1/26/2008 9:25:05 AM GMT Standard Time, [hidden email] writes: 2. There are socalled DECT Eco mode types. They do not emit, as long as the phone stays in the craddle. But the use of a cordless phone is, that the phone may lie soemwhere else nearby, so the base station is emitting. 3. There is a new development, where they emit at very low emission levels (in Switzerland)(in Switzerland)<WBR>, and some according to the distance to when farther away, the stronger the signal. Check out the Orchid phone from Orchid electronics, does as above. Paul uk [Non-text portions of this message have been removed] |
Thanks, all for your replies!
Charles, that was what I was thinking of, I believe - too bad they couldn't seem to get past that problem. It's not even for me, directly - I nearly always refuse to use cordless phones - but rather, for taking with me to houses in which other people insist on using them - so, at least while I was there, the phones wouldn't be radiating when not in use! Maybe if I can ever afford it I'll check out those Orchid phones, as a gift for people. Ahhhh...one day, we're going to laugh at the foolishness of creating technology which needs to be counteracted by technology to make it safer. R. --- In [hidden email], paulpjc@... wrote: > > > In a message dated 1/26/2008 9:25:05 AM GMT Standard Time, > charles@... writes: > > > 2. There are socalled DECT Eco mode types. > They do not emit, as long as the phone stays in the craddle. > But the use of a cordless phone is, that the phone may lie soemwhere else > nearby, so the base station is emitting. > > 3. There is a new development, where they emit at very low emission levels > (in Switzerland)(in Switzerland)<WBR>, and some according to the distance to > when farther away, the stronger the signal. > > > > > Check out the Orchid phone from Orchid electronics, does as above. > > Paul uk > > > > > > > [Non-text portions of this message have been removed] > |
In reply to this post by PUK
In fact the Orchid phone can be set to "low radiation" at all times, and
simply won't connect to the handset if it goes out of range. If you don't use this setting, the phone will power up to the minimum needed to contact the handset while it's at a longer range. They should be arriving in the country for shipping this week. Ariadne _____ From: [hidden email] [mailto:[hidden email]] On Behalf Of [hidden email] Sent: 26 January 2008 09:37 To: [hidden email] Subject: Re: [eSens] DECT 'Interrupter"? (Constant signal stopper) In a message dated 1/26/2008 9:25:05 AM GMT Standard Time, charles@milieuziekt <mailto:charles%40milieuziektes.be> es.be writes: 2. There are socalled DECT Eco mode types. They do not emit, as long as the phone stays in the craddle. But the use of a cordless phone is, that the phone may lie soemwhere else nearby, so the base station is emitting. 3. There is a new development, where they emit at very low emission levels (in Switzerland)(in Switzerland)<WBR>, and some according to the distance to when farther away, the stronger the signal. Check out the Orchid phone from Orchid electronics, does as above. Paul uk [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] |
Free forum by Nabble | Edit this page |