Hi all,
There's a property I've been looking at staying on, but it has three, yes three, smart meters on it. One for the house, one for the office space and one for the shed. The house one is pointed away from where my trailer would be, and is far away. The other two are perhaps 175-200 feet away from me, one being pointed (by that I mean the front end with the LCD screen) parallel to the length of my trailer, and the other being pointed right at it (though probably obstructed somewhat by hills). I'm not sure if these are the ones that go off every few minutes or just once an hour. Can I *partially *shield the meters so that they still function (ie, so the property owner doesn't get any accusing phone calls from the power company suggesting they're stealing electricity), while reducing the RF that goes in my direction? Does anyone know if the smart meters operate omni-directionally? Really appreciate your help, thanks! R. [Non-text portions of this message have been removed] |
They do NOT operate omni-directionally. For an excellent demostration on how smart meters work, see below video. Smart meters are 100 times MORE POWERFUL then cell phones. As there are 3 smart meters on this property, you'd be exposing yourself to a HUGE amount of constantly pulsing radiation/radio frequency. And the farther away those smart meters are from the main data on pole or cell towers, the stronger their signals are. Don't believe what the smart meter industries say, when they "state" these meters ONLY transmit once every hour... there are literally hundreds of documented readings that SHOW these meters transmit EVERY 15-30 seconds! The spikes go so high, they are often OFF the charts! As for "partially shielding" any one of these meters? this could make the situation worse, resulting in an actual amplifyng of the signals. Smart meters are directly hooked into the electrical wiring, not just of homes, but in the utility's transmission poles. The only real way to avoid that, is to be completely off the grid. Even with that, in this situation, you are basically right smack in the middle of the radiation field. Lizzie YouTube - The Dark Side of 'Smart' Meters 33 min - Nov 1, 2010 - Uploaded by eon3... Society consulting engineer Rob States explains how PG&E's so-called 'smart' meters work and why... ... The Dark Side of 'Smart ...www.youtube.com/watch?v=FLeCTaSG2-U To: [hidden email]; [hidden email] From: [hidden email] Date: Sat, 25 Jun 2011 09:05:50 -0400 Subject: [eSens] Can I *partially* shield a smart meter (so it still works)? Hi all, There's a property I've been looking at staying on, but it has three, yes three, smart meters on it. One for the house, one for the office space and one for the shed. The house one is pointed away from where my trailer would be, and is far away. The other two are perhaps 175-200 feet away from me, one being pointed (by that I mean the front end with the LCD screen) parallel to the length of my trailer, and the other being pointed right at it (though probably obstructed somewhat by hills). I'm not sure if these are the ones that go off every few minutes or just once an hour. Can I *partially *shield the meters so that they still function (ie, so the property owner doesn't get any accusing phone calls from the power company suggesting they're stealing electricity), while reducing the RF that goes in my direction? Does anyone know if the smart meters operate omni-directionally? Really appreciate your help, thanks! R. [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] |
Administrator
|
> The only real way to avoid that, is to be completely off the grid
Uhh, that's not particularly helpful information, is it? I'm sure that there are things to mitigate the impacts of Smart Meters on your health, other than moving to a deserted island... :-) Marc |
In reply to this post by Article One
Article One wrote:
> Can I *partially *shield the meters so that they still function (ie, so the > property owner doesn't get any accusing phone calls from the power company > suggesting they're stealing electricity), while reducing the RF that goes in > my direction? > > _IF_ they are of the broadcast type, then shielding them would get a visit from the company to investigate why the meter is apparantly broken. However if they are of the kind that transmit their data across the power lines themselves, then your attempts would have no effect. Neither would it remove the transient frequency carrying data from the power. > Does anyone know if the smart meters operate omni-directionally? > That would require them to mount an antenna that is directional. That would not seem to be consistant with their intent to create a mesh network. Their antennas must be non-directional. Stewart |
In reply to this post by Elizabeth thode
Yes it is powerful. Don't move there. Loni
--- On Sat, 6/25/11, Elizabeth thode <[hidden email]> wrote: From: Elizabeth thode <[hidden email]> Subject: RE: [eSens] Can I *partially* shield a smart meter (so it still works)? To: [hidden email] Date: Saturday, June 25, 2011, 8:00 AM They do NOT operate omni-directionally. For an excellent demostration on how smart meters work, see below video. Smart meters are 100 times MORE POWERFUL then cell phones. As there are 3 smart meters on this property, you'd be exposing yourself to a HUGE amount of constantly pulsing radiation/radio frequency. And the farther away those smart meters are from the main data on pole or cell towers, the stronger their signals are. Don't believe what the smart meter industries say, when they "state" these meters ONLY transmit once every hour... there are literally hundreds of documented readings that SHOW these meters transmit EVERY 15-30 seconds! The spikes go so high, they are often OFF the charts! As for "partially shielding" any one of these meters? this could make the situation worse, resulting in an actual amplifyng of the signals. Smart meters are directly hooked into the electrical wiring, not just of homes, but in the utility's transmission poles. The only real way to avoid that, is to be completely off the grid. Even with that, in this situation, you are basically right smack in the middle of the radiation field. Lizzie YouTube - The Dark Side of 'Smart' Meters 33 min - Nov 1, 2010 - Uploaded by eon3... Society consulting engineer Rob States explains how PG&E's so-called 'smart' meters work and why... ... The Dark Side of 'Smart ...www.youtube.com/watch?v=FLeCTaSG2-U To: [hidden email]; [hidden email] From: [hidden email] Date: Sat, 25 Jun 2011 09:05:50 -0400 Subject: [eSens] Can I *partially* shield a smart meter (so it still works)? Hi all, There's a property I've been looking at staying on, but it has three, yes three, smart meters on it. One for the house, one for the office space and one for the shed. The house one is pointed away from where my trailer would be, and is far away. The other two are perhaps 175-200 feet away from me, one being pointed (by that I mean the front end with the LCD screen) parallel to the length of my trailer, and the other being pointed right at it (though probably obstructed somewhat by hills). I'm not sure if these are the ones that go off every few minutes or just once an hour. Can I *partially *shield the meters so that they still function (ie, so the property owner doesn't get any accusing phone calls from the power company suggesting they're stealing electricity), while reducing the RF that goes in my direction? Does anyone know if the smart meters operate omni-directionally? Really appreciate your help, thanks! R. [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] |
In reply to this post by Marc Martin
Some utilities offer alternatives like my prepay meter. Living off grid would be difficult.
Loni --- On Sat, 6/25/11, Marc Martin <[hidden email]> wrote: From: Marc Martin <[hidden email]> Subject: RE: [eSens] Can I *partially* shield a smart meter (so it still works)? To: [hidden email] Date: Saturday, June 25, 2011, 8:08 AM > The only real way to avoid that, is to be completely off the grid Uhh, that's not particularly helpful information, is it? I'm sure that there are things to mitigate the impacts of Smart Meters on your health, other than moving to a deserted island... :-) Marc [Non-text portions of this message have been removed] |
In reply to this post by Marc Martin
Marc Martin wrote:
>> The only real way to avoid that, is to be completely off the grid >> > > Uhh, that's not particularly helpful information, is it? I'm sure > that there are things to mitigate the impacts of Smart Meters on > your health, other than moving to a deserted island... :-) > No, but to be realistic, if the designers of the grid want it to be broadcasting noise (from our point of view) then the only way to avoid the effects is to avoid the grid. The alternatives may not be palatable, as I react to the frequencies etc given off by a power inverter, the kind that converts 12V DC battery to 120V AC power. Only realistic solution I see is to run the necessary power in metal conduit, and clean it up with filters or an isolation-type non-interruptible power supply. If going solar, then the electronics need to be away from the home. And since the batteries need to be kept warm, some alternative solution must be found than putting them in your bedroom. Seriously, some have their battery bank in their bedroom and don't know why they are sick. I'm all for a deserted island with the way things are going. Stewart |
Administrator
|
In reply to this post by Elizabeth thode
> They do NOT operate omni-directionally.
What is your source for this information, Lizzie? With a simple Google search, I can find Smart Meter manufacturer websites that describe them as omni-directional. And that is the only thing would make any sense from a technical point of view. > Smart meters are 100 times MORE POWERFUL then cell phones. Well, according to one person, at least. Could be less, could be more... also, I think that 100x number assumes that you spend all of your life within 3 feet of a smart meter. Marc |
Hello everyone,
Good to see some lively discussion, even if we don't all agree on everything. ;) Now, what I can say, at least from having stood for a few minutes with my RF meter in hand by where my trailer is parked on this property, is that I was not picking up pulses from the smart meter(s) every second or numerous times per minute. I think that there are different types of smart meters, and not all of them send a signal the same number of times per minute/hour/day. So, Stewart, are you saying that if I stood to the *side* of a smart meter and picked up its transmitting pulse with my RF meter, that would indicate that it's omnidirectional? I'm not talking about wrapping these things in foil (tempting though that sounds); I'm talking about maybe sticking a piece of clearshield on the front of them, or putting a square of sheet metal on a post some distance away from whichever part of the smart meter is pointed toward where my trailer is, to bounce back some of the RF. I haven't run thorough tests on the ones on this property yet; what I've said are my preliminary observations. I have to weigh it like this: In this house, there is virtually no to very little cell phone tower noise, even with my most sensitive meter. Yet, once I walk/bike/drive into town (these are the suburbs), there are plenty of towers, shops have WiFi networks, and you can't walk by ten people without seeing at least one yakking on their cellphone. Additionally, every house in this town has an active smart meter. That's over forty thousand smart meters. The one on this house is closer to my bedroom than the two on this rural property would be to my trailer. Conversely, this rural property has two smart meters 175-200 feet away from my trailer. Perhaps they can be partially shielded as I described above without impeding their function. My trailer is also, in essence, a shielded box. This property does receive the internet wirelessly, but anyone who's seen my previous message, and Stewart's reply, will see that it's possible that the signal they receive is fairly weak and line-of-sight, high up, since the RF meters don't pick it up ambiently out of proximity to the outdoor receiving modem. *Optional reading for those who simply wish to reply to the above follows below:* Both places have their pros and cons. I am still wary of this other property, but then again - is my current location a perfect spot, either? Not truly. Maybe the countryside will do me good. It's *so* quiet there; you wouldn't believe how many birds there are on this gorgeous property.* *No traffic noise, no construction. As for going off grid and electrical dirt, etc.: I run the trailer off batteries, but I don't have a solar setup. I need AC power to charge the batteries. The charger I have generates some AM radio noise at the source (the charger), but that doesn't seem to carry at all into the trailer. It drops off fast. Looking inside the charger, it appears to be a simple linear transformer, not one of these "intelligent", high-noise switching chargers. I also need to be able to use my computer in the trailer (it's a modified, lower EMF, fanless, solid state computer with a modified monitor). I would run ethernet cable from the property owners office space. I need 'net access to do the bit of online work I can do. So, I need AC power from an outdoor outlet near the office space. Let me tell you, the power quality in these people's buildings is *crap*. They're nice folks, and generous about sharing their land, and wealthy, and though open minded, have bought into the high-tech nonsense. They've got big TVs, they've got CFLs, WiFi routers and DECT phones. The man who owns the place runs a company; he looks dazed all the time. The AM radio goes ape-sh*t when I bring it into his office, I've never even heard the noises it makes in there before; it's quite something. Yet, I need some of that electricity to charge the batteries and use my computer. So, I got a decent 20A rated powerline filter, made by Schaffner. I have its chassis mounted on a flat metal ground plane, and the this ground plane is attached with really heavy gauge copper wire to a copper ground rod in wet soil. It performs quite well! The difference in AM noise on the line between the unfiltered AC extension cord, and after the grounded filter is considerable. Is it perfect? No. I don't have hundreds or thousands of dollars for a military grade powerline filter, but if I build an off grid system, I'll have to get one. However, comparing the filtered line there to the normal AC line in our house, I'd say that there's probably not any more noise than here. Neither's perfect, but again, I need to weigh the pros and cons. If I can convince these people to "clean up" their act, I will be pleased. All I can say is that I'll have to try the place out. If I feel better, I stay. If not, I go. Thanks all for your replies, and if you've got any more sound advice, please keep it coming. Thanks! Take care, R. On Sat, Jun 25, 2011 at 11:37 AM, Marc Martin <[hidden email]> wrote: > ** > > > > They do NOT operate omni-directionally. > > What is your source for this information, Lizzie? With > a simple Google search, I can find Smart Meter manufacturer > websites that describe them as omni-directional. And that > is the only thing would make any sense from a technical > point of view. > > > Smart meters are 100 times MORE POWERFUL then cell phones. > > Well, according to one person, at least. Could be less, > could be more... also, I think that 100x number assumes > that you spend all of your life within 3 feet of a smart > meter. > > Marc > > > [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/eSens/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/eSens/join (Yahoo! ID required) <*> To change settings via email: [hidden email] [hidden email] <*> To unsubscribe from this group, send an email to: [hidden email] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
They do NOT operate omni-directionally. > > > > What is your source for this information, Lizzie? With > > a simple Google search, I can find Smart Meter manufacturer > > websites that describe them as omni-directional. And that > > is the only thing would make any sense from a technical > > point of view. My reply: I generally don't trust someone who has a "vested" interest in marketing a product. I tend to go with independent sources. Also, if you read what the utility companies are saying about the health effects of smart meters, THEY ARE STATING THERE ARE NO ILL HEALTH EFFECTS from radio frequency smart meters. (I'm paraphrasing, but that IS what they are saying.) So coming from someone is has personal experience with ES, how does that work? Correct me if I'm wrong, but the cell phone companies have been saying the same thing; that cell phone radiation is SAFE. So to me, there's not much difference between the lies coming from the cell phone manufacturers and the lies coming from the smart meter makers. Same radio frequency/wireless radiation/non-ionising radiation..whatever phrase you want to use to describe AMI smart meter technology. While it is true, that there are different "generations" of the smart meters, they are ALL radio frequency wireless technology. IF its AMI technology, its radio frequency wireless technology. That's what the A stands for, automatic reader...it can be read automatically because it is wireless. Does a cell phone only transmit its signal in "one" direction? I respectfully rest my case. It is good that we don't always agree....bouncing various information back and forth gives birth to new information. I do give credit to the theory of trying to "bounce" the RF away from the trailer area. It has merit when dealing with one smart meter, how it plays out in reality with 3, I guess you'll have to keep us posted. Lizzie > To: [hidden email]; [hidden email] > From: [hidden email] > Date: Sat, 25 Jun 2011 12:15:59 -0400 > Subject: Re: [eSens] Can I *partially* shield a smart meter (so it still works)? > > Hello everyone, > > Good to see some lively discussion, even if we don't all agree on > everything. ;) > > Now, what I can say, at least from having stood for a few minutes with my RF > meter in hand by where my trailer is parked on this property, is that I was > not picking up pulses from the smart meter(s) every second or numerous times > per minute. I think that there are different types of smart meters, and not > all of them send a signal the same number of times per minute/hour/day. > > So, Stewart, are you saying that if I stood to the *side* of a smart meter > and picked up its transmitting pulse with my RF meter, that would indicate > that it's omnidirectional? > > I'm not talking about wrapping these things in foil (tempting though that > sounds); I'm talking about maybe sticking a piece of clearshield on the > front of them, or putting a square of sheet metal on a post some distance > away from whichever part of the smart meter is pointed toward where my > trailer is, to bounce back some of the RF. > > I haven't run thorough tests on the ones on this property yet; what I've > said are my preliminary observations. > > I have to weigh it like this: In this house, there is virtually no to very > little cell phone tower noise, even with my most sensitive meter. Yet, once > I walk/bike/drive into town (these are the suburbs), there are plenty of > towers, shops have WiFi networks, and you can't walk by ten people without > seeing at least one yakking on their cellphone. Additionally, every house > in this town has an active smart meter. That's over forty thousand smart > meters. The one on this house is closer to my bedroom than the two on this > rural property would be to my trailer. > > Conversely, this rural property has two smart meters 175-200 feet away from > my trailer. Perhaps they can be partially shielded as I described above > without impeding their function. My trailer is also, in essence, a shielded > box. This property does receive the internet wirelessly, but anyone who's > seen my previous message, and Stewart's reply, will see that it's possible > that the signal they receive is fairly weak and line-of-sight, high up, > since the RF meters don't pick it up ambiently out of proximity to the > outdoor receiving modem. > > *Optional reading for those who simply wish to reply to the above follows > below:* > > Both places have their pros and cons. I am still wary of this other > property, but then again - is my current location a perfect spot, either? > Not truly. Maybe the countryside will do me good. It's *so* quiet there; > you wouldn't believe how many birds there are on this gorgeous property.* *No > traffic noise, no construction. > > As for going off grid and electrical dirt, etc.: I run the trailer off > batteries, but I don't have a solar setup. I need AC power to charge the > batteries. The charger I have generates some AM radio noise at the source > (the charger), but that doesn't seem to carry at all into the trailer. It > drops off fast. Looking inside the charger, it appears to be a simple > linear transformer, not one of these "intelligent", high-noise switching > chargers. > > I also need to be able to use my computer in the trailer (it's a modified, > lower EMF, fanless, solid state computer with a modified monitor). I would > run ethernet cable from the property owners office space. I need 'net > access to do the bit of online work I can do. So, I need AC power from an > outdoor outlet near the office space. > > Let me tell you, the power quality in these people's buildings is *crap*. > They're nice folks, and generous about sharing their land, and wealthy, and > though open minded, have bought into the high-tech nonsense. They've got > big TVs, they've got CFLs, WiFi routers and DECT phones. The man who owns > the place runs a company; he looks dazed all the time. The AM radio goes > ape-sh*t when I bring it into his office, I've never even heard the noises > it makes in there before; it's quite something. > > Yet, I need some of that electricity to charge the batteries and use my > computer. So, I got a decent 20A rated powerline filter, made by Schaffner. > I have its chassis mounted on a flat metal ground plane, and the this > ground plane is attached with really heavy gauge copper wire to a copper > ground rod in wet soil. > > It performs quite well! The difference in AM noise on the line between the > unfiltered AC extension cord, and after the grounded filter is considerable. > Is it perfect? No. I don't have hundreds or thousands of dollars for a > military grade powerline filter, but if I build an off grid system, I'll > have to get one. > > However, comparing the filtered line there to the normal AC line in our > house, I'd say that there's probably not any more noise than here. > Neither's perfect, but again, I need to weigh the pros and cons. If I can > convince these people to "clean up" their act, I will be pleased. > > All I can say is that I'll have to try the place out. If I feel better, I > stay. If not, I go. Thanks all for your replies, and if you've got any > more sound advice, please keep it coming. > > Thanks! > > Take care, > > R. > > > > On Sat, Jun 25, 2011 at 11:37 AM, Marc Martin <[hidden email]> wrote: > > > ** > > > > > > > They do NOT operate omni-directionally. > > > > What is your source for this information, Lizzie? With > > a simple Google search, I can find Smart Meter manufacturer > > websites that describe them as omni-directional. And that > > is the only thing would make any sense from a technical > > point of view. > > > > > Smart meters are 100 times MORE POWERFUL then cell phones. > > > > Well, according to one person, at least. Could be less, > > could be more... also, I think that 100x number assumes > > that you spend all of your life within 3 feet of a smart > > meter. > > > > Marc > > > > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > > [Non-text portions of this message have been removed] |
In reply to this post by Article One
A woman in Chicago coverehers with foil. The utility company said they were going to sue her. She said "Great. If I sued you, I'd have to pay. if you sue me, I get to share information in the courtroom about these meters, for free, and the public will learn a lot!" The company has not said anything more. They come and take off the foil to take a reading, and she replaces it. You need to enclose the meter entirely to stop the airborne signal. There may still be signal on the building wiring, though. Shivani A. www.LifeEnergies.com [Non-text portions of this message have been removed] |
In reply to this post by Article One
Hi Steve,
I have three RF meters with directional antennas, and can measure from 27 MHz to 6 GHz. I admit I haven't done comprehensive tests on the meters on this property, but if I go back to try the place out, I will. Cheers, R. On Sun, Jun 26, 2011 at 8:16 AM, Steve Miller <[hidden email]>wrote: > ** > > > ** ** > > ** ** > > Best thing to do is get a microwave/electrosmog detector and then you can > find out field strengths and directional beam.**** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > *From:* [hidden email] [mailto:[hidden email]] *On > Behalf Of *Article One > *Sent:* 25 June 2011 14:06 > > *To:* [hidden email]; [hidden email] > *Subject:* [emfrefugee] Can I *partially* shield a smart meter (so it > still works)?**** > > ** ** > > **** > > Hi all,**** > > ** ** > > There's a property I've been looking at staying on, but it has three, yes > three, smart meters on it. One for the house, one for the office space and > one for the shed. The house one is pointed away from where my trailer would > be, and is far away. The other two are perhaps 175-200 feet away from me, > one being pointed (by that I mean the front end with the LCD screen) > parallel to the length of my trailer, and the other being pointed right at > it (though probably obstructed somewhat by hills).**** > > ** ** > > I'm not sure if these are the ones that go off every few minutes or just > once an hour.**** > > ** ** > > Can I *partially *shield the meters so that they still function (ie, so > the property owner doesn't get any accusing phone calls from the power > company suggesting they're stealing electricity), while reducing the RF that > goes in my direction?**** > > ** ** > > Does anyone know if the smart meters operate omni-directionally?**** > > ** ** > > Really appreciate your help, thanks!**** > > ** ** > > R.**** > > **** > > > [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/eSens/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/eSens/join (Yahoo! ID required) <*> To change settings via email: [hidden email] [hidden email] <*> To unsubscribe from this group, send an email to: [hidden email] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
Administrator
|
In reply to this post by Elizabeth thode
On 6/25/2011 3:41 PM, Elizabeth thode wrote:
> They do NOT operate omni-directionally. > Does a cell phone only transmit its signal in "one" direction? > I respectfully rest my case. Lizzie, I think we are actually in agreement here -- it's just that you don't seem to know what "Omnidirectional" actually means... :-) From wikipedia: "Omnidirectional antenna - an antenna that radiates equally in all directions" Marc |
In reply to this post by SArjuna
Great info, Shivani!
Thanks for sharing. Also, for newbies' info, I had the water utility bury their smart meter in my yard, out by the road, rather than have it out of the ground sending signals. They still have to send a meter reader out to read it. I can still pick up frequencies from it from 12 feet away, but you can feel frequencies from it much further than that out of the ground. If you do this, have them use plastic pipe into your house and have them ground the meter well where the water enters the plastic pipe at the meter, or frequencies will go into your house on the water supply. Diane --- On Sat, 6/25/11, [hidden email] <[hidden email]> wrote: From: [hidden email] <[hidden email]> Subject: [eSens] Re: Can I *partially* shield a smart meter (so it still works)? To: [hidden email] Date: Saturday, June 25, 2011, 10:34 PM A woman in Chicago coverehers with foil. The utility company said they were going to sue her. She said "Great. If I sued you, I'd have to pay. if you sue me, I get to share information in the courtroom about these meters, for free, and the public will learn a lot!" The company has not said anything more. They come and take off the foil to take a reading, and she replaces it. You need to enclose the meter entirely to stop the airborne signal. There may still be signal on the building wiring, though. Shivani A. www.LifeEnergies.com [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] |
In reply to this post by SArjuna
Ha, good for her! Believe you me, I'd love to wrap these things in foil (or
wack 'em with something heavy and blunt, lol), but I've probably already surprised these people who own this land a little bit with my peculiarities, and will probably surprise them more with the things I have to say, if I ever have time to talk to them. I can't have the utility company harassing them; I need to keep on good terms with them for my own reputation, out of respect for them letting me, if I want to, live on their land for free, and for my partner's sake who lives there, too. Suppose the best thing I can do is set up an intermediary, directional shield (if my meters show it could work) between the smart meter and where my trailer is. We'll see; I hope it all goes well. I've got (don't know if you saw it in my previous post a decent, grounded, RF powerline filter on the AC cord that'll charge my batteries and power my computer, to clean up much of the dirt from the line. Cheers, and thanks for the great story. R. On Sat, Jun 25, 2011 at 10:34 PM, <[hidden email]> wrote: > ** > > > > A woman in Chicago coverehers with foil. The utility company said they were > going to sue her. She said "Great. If I sued you, I'd have to pay. if you > sue me, I get to share information in the courtroom about these meters, for > free, and the public will learn a lot!" The company has not said anything > more. They come and take off the foil to take a reading, and she replaces > it. > > You need to enclose the meter entirely to stop the airborne signal. There > may still be signal on the building wiring, though. > > Shivani A. > www.LifeEnergies.com > > > [Non-text portions of this message have been removed] > > > [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/eSens/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/eSens/join (Yahoo! ID required) <*> To change settings via email: [hidden email] [hidden email] <*> To unsubscribe from this group, send an email to: [hidden email] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
In reply to this post by Marc Martin
"Smart" meters meters are horrible. My sister used to be EHS to only ELF, no problems w cell phones or wifi. After two days living with a smeter on the house NEXT DOOR (none on hers because we kept them away so far) she became sensitized and a horrific experience ensued, had to stay in car and lurk parking for hours next to open space and subsequently sensitized to wifi et al.
Stay as far away as you can. Look at the stories, many people with ZERO history of EHS became sensitized after smeter exposure: http://smartmeters.transbay.net/doku.php?id=health I know a tech who has been researching smeters with high end eqt. He finds that the pulses are completely unpredictable, could be many in a given period (seconds) or could be 20 minutes or more with no pulses. Also the strength of the pulses varies unpredictably, but some are enormous, 60k times more than what is stated by utility companies as "average power," for example. It is wild. Coming soon to your neighborhood. Covering with foil reflects signals back into the house, some report that it causes an unpredictable "ramping up" of the signal to horrific and intolerable levels. We do not know what the "mesh network" is up to at any given moment, these meters and other components are "chirping" talking to each other all the time. Some smeters are in situations where people do spend most of their time close to them. 5 of them on a landing right outside the kitchen where someone spends a lot of time cooking, facing into the kitchen. And the wall that those 5 smeters are mounted on backs onto that apartment's bathroom and hallway -- if those meters were to be covered with foil, the signal would bounce back into the bathroom and possibly magnify the signal. Other unsuspecting people have a smeter (or more) mounted on the other side of the wall at the head of their bed. This particular scenario caused a terrible case of EHS plus the woman developed a "volcanically growing' cancer on her jaw-- see http://bit.ly/m4uhjR just look at the stories at emfsafetynetwork.org (from the link above) --- In [hidden email], "Marc Martin" <marc@...> wrote: > > > They do NOT operate omni-directionally. > > What is your source for this information, Lizzie? With > a simple Google search, I can find Smart Meter manufacturer > websites that describe them as omni-directional. And that > is the only thing would make any sense from a technical > point of view. > > > Smart meters are 100 times MORE POWERFUL then cell phones. > > Well, according to one person, at least. Could be less, > could be more... also, I think that 100x number assumes > that you spend all of your life within 3 feet of a smart > meter. > > Marc > |
In reply to this post by Article One
Hi R. and all,
This reply touches on a couple threads. > Now, what I can say, at least from having stood for a few minutes with my RF > meter in hand by where my trailer is parked on this property, is that I was > not picking up pulses from the smart meter(s) every second or numerous times > per minute. I think that there are different types of smart meters, and not > all of them send a signal the same number of times per minute/hour/day. > I think the determining factor, is now many other smart meters are around. Culverpratt just wrote yesterday that the pules are completely unpredictable. Of course, one meter emits an outgoing packet every _x_ hours. It transmits to the next closest meter in a mesh network, or to the tower if close enough. That meter sends the packet on to the next meter, and so on until it reaches the tower. The more smart meters around, the more often the chirping, and the higher the exposure, and the faster people will get sick. So if you are in a very rural area, and IF the meter is wireless, and not just transmitting back along the power line, as they are going to do here, then there are simply more than one possibility and outcome to check for. etc. Make sense? > So, Stewart, are you saying that if I stood to the *side* of a smart meter > and picked up its transmitting pulse with my RF meter, that would indicate > that it's omnidirectional? > Yes, I can't imagine them not being omnidirectional. I would simply want to know if it broadcasts wireless. > I'm not talking about wrapping these things in foil (tempting though that > sounds); I'm talking about maybe sticking a piece of clearshield on the > front of them, or putting a square of sheet metal on a post some distance > away from whichever part of the smart meter is pointed toward where my > trailer is, to bounce back some of the RF. > > Good plan, maybe even bounce it up or down or away from your friendly and helpful neighbor. > That's over forty thousand smart > meters. The one on this house is closer to my bedroom than the two on this > rural property would be to my trailer. > But the exposure levels are going to be different, as I think you have figured out. One bird chirping is not like a flock of starlings. > The charger I have generates some AM radio noise at the source > (the charger), but that doesn't seem to carry at all into the trailer. It > drops off fast. What I did when in a trailer, was to put the NAPA auto automatic battery charger 50+ feet away in or on a building close by, providing power. Then run a 12 guage romex/insulated set of wires to the trailer batteries. Then I ran the Norcold amonia fridge (no compressor) on a heavy duty extension cord, so that it wouldn't use propane, and didn't bother me up front. (bed in back, away from power box). Re-wired the furnace so it wouldn't use the chassis as a ground loop, and it was quiet. > they've got CFLs, WiFi routers and DECT phones. That is disturbing. That should be a higher concern than one smart meter. > The man who owns > the place runs a company; he looks dazed all the time. The AM radio goes > ape-sh*t when I bring it into his office, I've never even heard the noises > it makes in there before; it's quite something. > And so it may be starting to affect him. Are there any hills/buildings/trees to block the "view" from his place to your trailer? > All I can say is that I'll have to try the place out. If I feel better, I > stay. If not, I go. Hope it goes well, Stewart |
Hello Stewart,
Thanks for your thorough replies! You make good points. The best thing to do is some comprehensive testing when I'm there. I think I am planning to try it out; if I find I do well there, or no worse than here, then I should make the most of the chance to spend some time in an otherwise clean, quiet, rural setting. I'd likely try out putting up a piece of sheet metal on a post first, as it takes away the risk of tampering with the actual smart meter itself. The meters, to the best of my knowledge, operate strictly wirelessly. The area is fairly rural; people don't even get cell reception without driving way up a hill on the property, thank goodness. (I swear, if people ever come to their senses about all this, the whole "smart grid" thing, along with the rest of the wireless madness will turn into a "What the hell were we thinking?" laughingstock.) The charger we have for the batteries does generate some AM noise that sounds typical of a linear transformer, but doesn't seem to carry into the trailer wiring at all. The magnetic field is high but drops off fairly quickly with distance. If I could run it from that far away I would, but we've already invested what is for us a lot of money in heavy duty extension cords and water piping. Good idea, though. The fridge runs on propane; whisper-quiet, very efficient, never bothered me. Uses the flame to circulate ammonia; never tried plugging it into AC before. It's made by Dometic. How did you rewire the furnace (if you can explain in layman's terms)? The furnace is an old Duotherm that came with the trailer, it still works fine. It does generate a local magnetic field, and some "hot spots" in the trailer walls (probably from wiring), and some RF noise from the blower/motor, but I've found that staying away from it when running (ie, on the bed) hasn't proven problematic. But what you said about the furnace sounds interesting; I'd like to hear more if you've got the chance. As for their WiFi (not counting the wireless broadband reception they get, which, as we discussed, may not be that bad if it's mostly line-of-sight), CFLs, big TVs and DECT phones, well, the unfortunate truth is that it's mighty hard to find people who don't have some such combination in their homes these days. The good news is that almost everyone I've taken the time to inform has listened and acted to some extent. These people might be tricky, since they've really entrenched themselves in it, but we'll see. One farm family even refused a $12,000/year rental offer from a telcom company to put a tower on their land because of what I told them, even though they really could've used the money. The house (where some of this "gear" is) is pretty far from the trailer. The office building is closer, but has what are likely thick walls and is partially shielded by a metal roof. It's maybe 200 or more feet from the trailer, and not directly line-of-sight, more off on an angle, and there is some degree of terrain between us and it. The trailer's about as far away as possible from the buildings, short of a very prohibitive investment in long, long, heavy gauge wires, hoses and fiber optic cable. I, if I stay, plan to have as little as possible to do with/in their buildings. Thanks again! Take care, R. On Mon, Jun 27, 2011 at 10:38 AM, S Andreason <[hidden email]> wrote: > ** > > > Hi R. and all, > This reply touches on a couple threads. > > > > Now, what I can say, at least from having stood for a few minutes with my > RF > > meter in hand by where my trailer is parked on this property, is that I > was > > not picking up pulses from the smart meter(s) every second or numerous > times > > per minute. I think that there are different types of smart meters, and > not > > all of them send a signal the same number of times per minute/hour/day. > > > > I think the determining factor, is now many other smart meters are around. > Culverpratt just wrote yesterday that the pules are completely > unpredictable. > Of course, one meter emits an outgoing packet every _x_ hours. It > transmits to the next closest meter in a mesh network, or to the tower > if close enough. That meter sends the packet on to the next meter, and > so on until it reaches the tower. > > The more smart meters around, the more often the chirping, and the > higher the exposure, and the faster people will get sick. > So if you are in a very rural area, and IF the meter is wireless, and > not just transmitting back along the power line, as they are going to do > here, then there are simply more than one possibility and outcome to > check for. etc. Make sense? > > > > So, Stewart, are you saying that if I stood to the *side* of a smart > meter > > and picked up its transmitting pulse with my RF meter, that would > indicate > > that it's omnidirectional? > > > Yes, I can't imagine them not being omnidirectional. I would simply want > to know if it broadcasts wireless. > > > > I'm not talking about wrapping these things in foil (tempting though that > > sounds); I'm talking about maybe sticking a piece of clearshield on the > > front of them, or putting a square of sheet metal on a post some distance > > away from whichever part of the smart meter is pointed toward where my > > trailer is, to bounce back some of the RF. > > > > > Good plan, maybe even bounce it up or down or away from your friendly > and helpful neighbor. > > > > That's over forty thousand smart > > meters. The one on this house is closer to my bedroom than the two on > this > > rural property would be to my trailer. > > > But the exposure levels are going to be different, as I think you have > figured out. One bird chirping is not like a flock of starlings. > > > > The charger I have generates some AM radio noise at the source > > (the charger), but that doesn't seem to carry at all into the trailer. It > > drops off fast. > > What I did when in a trailer, was to put the NAPA auto automatic battery > charger 50+ feet away in or on a building close by, providing power. > Then run a 12 guage romex/insulated set of wires to the trailer > batteries. Then I ran the Norcold amonia fridge (no compressor) on a > heavy duty extension cord, so that it wouldn't use propane, and didn't > bother me up front. (bed in back, away from power box). Re-wired the > furnace so it wouldn't use the chassis as a ground loop, and it was quiet. > > > > they've got CFLs, WiFi routers and DECT phones. > That is disturbing. That should be a higher concern than one smart meter. > > > > The man who owns > > the place runs a company; he looks dazed all the time. The AM radio goes > > ape-sh*t when I bring it into his office, I've never even heard the > noises > > it makes in there before; it's quite something. > > > And so it may be starting to affect him. > Are there any hills/buildings/trees to block the "view" from his place > to your trailer? > > > > All I can say is that I'll have to try the place out. If I feel better, I > > stay. If not, I go. > > Hope it goes well, > Stewart > > > [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/eSens/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/eSens/join (Yahoo! ID required) <*> To change settings via email: [hidden email] [hidden email] <*> To unsubscribe from this group, send an email to: [hidden email] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
In reply to this post by Article One
I am new to this so bear with me as I get up to speed with you
chaps. I may be a little off kilter and not entirely thinking straight because of this wireless hell I have ended up in. I want to just rip them off the wall right now or smash them would be more satisfying. I like the video recently of the lady that got arrested. She had balls. Maybe in jail the wireless will be better than my flat! What is the worst they could do to me? Wouldn't the news report be better than just putting up with these wankers and their meters? I need a voice of reason right now. Other than live out of my car in the country, has anybody just smashed these meters and got them replaced with something else? in hell... Justin On Mon, 27 Jun 2011 21:43:37 -0400 Article One <[hidden email]> wrote: >Hello Stewart, > >Thanks for your thorough replies! > >You make good points. The best thing to do is some comprehensive >testing >when I'm there. I think I am planning to try it out; if I find I >do well >there, or no worse than here, then I should make the most of the >chance to >spend some time in an otherwise clean, quiet, rural setting. I'd >likely try >out putting up a piece of sheet metal on a post first, as it takes >away the >risk of tampering with the actual smart meter itself. > >The meters, to the best of my knowledge, operate strictly >wirelessly. The >area is fairly rural; people don't even get cell reception without >driving >way up a hill on the property, thank goodness. (I swear, if >people ever >come to their senses about all this, the whole "smart grid" thing, >along >with the rest of the wireless madness will turn into a "What the >hell were >we thinking?" laughingstock.) > >The charger we have for the batteries does generate some AM noise >that >sounds typical of a linear transformer, but doesn't seem to carry >into the >trailer wiring at all. The magnetic field is high but drops off >fairly >quickly with distance. If I could run it from that far away I >would, but >we've already invested what is for us a lot of money in heavy duty >extension >cords and water piping. Good idea, though. > >The fridge runs on propane; whisper-quiet, very efficient, never >bothered >me. Uses the flame to circulate ammonia; never tried plugging it >into AC >before. It's made by Dometic. > >How did you rewire the furnace (if you can explain in layman's >terms)? The >furnace is an old Duotherm that came with the trailer, it still >works fine. > It does generate a local magnetic field, and some "hot spots" in >the >trailer walls (probably from wiring), and some RF noise from the >blower/motor, but I've found that staying away from it when >running (ie, on >the bed) hasn't proven problematic. But what you said about the >furnace >sounds interesting; I'd like to hear more if you've got the >chance. > >As for their WiFi (not counting the wireless broadband reception >they get, >which, as we discussed, may not be that bad if it's mostly line-of- >sight), >CFLs, big TVs and DECT phones, well, the unfortunate truth is that >it's >mighty hard to find people who don't have some such combination in >their >homes these days. The good news is that almost everyone I've >taken the time >to inform has listened and acted to some extent. These people >might be >tricky, since they've really entrenched themselves in it, but >we'll see. > One farm family even refused a $12,000/year rental offer from a >telcom >company to put a tower on their land because of what I told them, >even >though they really could've used the money. > >The house (where some of this "gear" is) is pretty far from the >trailer. > >The office building is closer, but has what are likely thick walls >and is >partially shielded by a metal roof. It's maybe 200 or more feet >from the >trailer, and not directly line-of-sight, more off on an angle, and >there is >some degree of terrain between us and it. The trailer's about as >far away >as possible from the buildings, short of a very prohibitive >investment in >long, long, heavy gauge wires, hoses and fiber optic cable. > >I, if I stay, plan to have as little as possible to do with/in >their >buildings. > >Thanks again! > >Take care, > >R. > > > > > >On Mon, Jun 27, 2011 at 10:38 AM, S Andreason ><[hidden email]> wrote: > >> ** >> >> >> Hi R. and all, >> This reply touches on a couple threads. >> >> >> > Now, what I can say, at least from having stood for a few >minutes with my >> RF >> > meter in hand by where my trailer is parked on this property, >is that I >> was >> > not picking up pulses from the smart meter(s) every second or >numerous >> times >> > per minute. I think that there are different types of smart >meters, and >> not >> > all of them send a signal the same number of times per >minute/hour/day. >> > >> >> I think the determining factor, is now many other smart meters >are around. >> Culverpratt just wrote yesterday that the pules are completely >> unpredictable. >> Of course, one meter emits an outgoing packet every _x_ hours. >It >> transmits to the next closest meter in a mesh network, or to the >tower >> if close enough. That meter sends the packet on to the next >meter, and >> so on until it reaches the tower. >> >> The more smart meters around, the more often the chirping, and >the >> higher the exposure, and the faster people will get sick. >> So if you are in a very rural area, and IF the meter is >wireless, and >> not just transmitting back along the power line, as they are >going to do >> here, then there are simply more than one possibility and >outcome to >> check for. etc. Make sense? >> >> >> > So, Stewart, are you saying that if I stood to the *side* of a >smart >> meter >> > and picked up its transmitting pulse with my RF meter, that >would >> indicate >> > that it's omnidirectional? >> > >> Yes, I can't imagine them not being omnidirectional. I would >simply want >> to know if it broadcasts wireless. >> >> >> > I'm not talking about wrapping these things in foil (tempting >though that >> > sounds); I'm talking about maybe sticking a piece of >clearshield on the >> > front of them, or putting a square of sheet metal on a post >some distance >> > away from whichever part of the smart meter is pointed toward >where my >> > trailer is, to bounce back some of the RF. >> > >> > >> Good plan, maybe even bounce it up or down or away from your >friendly >> and helpful neighbor. >> >> >> > That's over forty thousand smart >> > meters. The one on this house is closer to my bedroom than the >two on >> this >> > rural property would be to my trailer. >> > >> But the exposure levels are going to be different, as I think >you have >> figured out. One bird chirping is not like a flock of starlings. >> >> >> > The charger I have generates some AM radio noise at the source >> > (the charger), but that doesn't seem to carry at all into the >trailer. It >> > drops off fast. >> >> What I did when in a trailer, was to put the NAPA auto automatic >battery >> charger 50+ feet away in or on a building close by, providing >power. >> Then run a 12 guage romex/insulated set of wires to the trailer >> batteries. Then I ran the Norcold amonia fridge (no compressor) >on a >> heavy duty extension cord, so that it wouldn't use propane, and >didn't >> bother me up front. (bed in back, away from power box). Re-wired >the >> furnace so it wouldn't use the chassis as a ground loop, and it >was quiet. >> >> >> > they've got CFLs, WiFi routers and DECT phones. >> That is disturbing. That should be a higher concern than one >smart meter. >> >> >> > The man who owns >> > the place runs a company; he looks dazed all the time. The AM >radio goes >> > ape-sh*t when I bring it into his office, I've never even >heard the >> noises >> > it makes in there before; it's quite something. >> > >> And so it may be starting to affect him. >> Are there any hills/buildings/trees to block the "view" from his >place >> to your trailer? >> >> >> > All I can say is that I'll have to try the place out. If I >feel better, I >> > stay. If not, I go. >> >> Hope it goes well, >> Stewart >> >> >> > > >[Non-text portions of this message have been removed] > > > >------------------------------------ > >Yahoo! Groups Links > > > |
Justin, careful w the smahing idea, you could get hurt. Just getting close to it is bad idea for EHS.
some people have replaced w analog meter, you have to find a willing electrician. Nobody arrested or cut off -- so far From: Date: Thu, Jun 23, 2011 at 4:04 PM Subject: RE: Fwd: Analog Meters For Sale? To: Here's a place you can get an analog meter. I just called them... http://www.byramlabs.com/index.php?manufacturers_id=14&filter_id=68&ref=g&gclid=CK6CpbeRzakCFQgbQgodo1gxNw -------- Original Message -------- From: To: Sent: Thursday, June 23, 2011 3:02:16 PM Subject: Re: Analog Meters For Sale? Unfortunately, Real Goods has discontinued all of their catalog sales. They now are strictly in the solar installation business. I wrote their tech dept earlier today, asking if they knew of a current source for analog meters. If I hear of anything viable, I'll email the info to this group. ======== On Fri, Jun 24, 2011 at 10:06 AM, wrote: If you search for "AC Kilowatt-Hour Meter" you will find the ones at Real Goods, however, they only sell them through the store in Hopland at: 707 472 2400. They only have 5 left, but the customer service person said she would talk to her manager about making them available. I let them know that people may start buying them up in volume. When you search you will find other brands and other sources for meters. I think it's time for there to be a mass switching out of meters! What are they going to do? Turn us all off? Literally, POWER to the people! ========= plus: From: Date: Fri, Jun 24, 2011 at 11:20 AM Subject: Re: Buying analogs, get model info from current analog To: [hidden email] Write down the information from your analog meters now. There are different makes and models out there. If you get a Smart Meter "by accident", you shouldn't get close to it to get the information. So get the information now while you can from your analog. --- In [hidden email], 1.618034@... wrote: > > I am new to this so bear with me as I get up to speed with you > chaps. I may be a little off kilter and not entirely thinking > straight because of this wireless hell I have ended up in. I want > to just rip them off the wall right now or smash them would be more > satisfying. I like the video recently of the lady that got > arrested. She had balls. Maybe in jail the wireless will be better > than my flat! > What is the worst they could do to me? Wouldn't the news report be > better than just putting up with these wankers and their meters? > I need a voice of reason right now. Other than live out of my car > in the country, has anybody just smashed these meters and got them > replaced with something else? > in hell... > Justin > |
Free forum by Nabble | Edit this page |