Power line communication is synonymous with powerful dirty electricity.  I have found filters to be useless in mitigating the DE from it.  The very low frequency type PLC used in the USA utilize frequency too close to the 60 Hz signal to be filtered out.   TWACS power line communication/meter is so powerful that the signal can be stopped only at the substation, so it remains on the house wiring even when the breaker is off.  It causes fluctuating electrical and magnetic fields, wiring to become antennas, and travels into the soil. 
 
Here's excellent information on power line communication - written by an electrically sensitive engineer:    http://www.eiwellspring.org/smartmeter/TWACS.htm
 
http://www.eiwellspring.org/plc.html


 

---

Date: Mon, 18 May 2015 09:27:34 -0700
From: [hidden email]
To: [hidden email]
Subject: [ES] Re: RE: Can A Home Have TOO Much Electrical Current Being Supplied To It?

Oh yes, power line communication, one of the various way to implement "Smart Meters".  Can that be dealt with by treating it as "dirty electricity"?  That is, using filters in the house...

Marc

---

If you reply to this email, your message will be added to the discussion below:

http://es-forum.com/Can-A-Home-Have-TOO-Much-Electrical-Current-Being-Supplied-To-It-tp4027855p4027862.html

To start a new topic under ES, email [hidden email]
To unsubscribe from ES, click here.

---

If you reply to this email, your message will be added to the discussion below:

http://es-forum.com/Can-A-Home-Have-TOO-Much-Electrical-Current-Being-Supplied-To-It-tp4027855p4027864.html

To start a new topic under ES, email [hidden email]
To unsubscribe from ES, click here.