> **
>
>
> I'm interested in the "websites for how to modify others yourself (linked
> from lessEmf)." I believe you're referring to this one:
> http://home.comcast.net/~kaliber/magsite/gmantmod.html. It's meant for
> Gauss Master only.
>
> CellSensor is a whole lot easier to modify as the probe is external,
> connected to the meter with a jack. I need to know what's in the probe
> though. It's sealed shut, and I don't feel like breaking it just to find
> out.
>
> I know I'm sensitive to both AC and DC. So, any suggestions anyone?
>
> kb
>
> Bill Bruno wrote thus at 00:49 13/01/2012:
>
> >It's a long coil around a ferrite rod, sometimes in a pcb tube or other
> >protective case.
> >
> >On Wed, Jan 11, 2012 at 12:11 AM, Kumara Bhikkhu
> ><[hidden email]>wrote:
> >
> >> **
> >>
> >>
> >> Bill Bruno wrote thus at 12:02 11/01/2012:
> >>
> >> >You probably want something that can go down to .002 milligauss,
> >> >or at least .01.
> >>
> >> Yes! My current one has a needle to indicate 0-5 mg (when set to "high"
> >> sensitivity). At .01, it's as good as nothing on the meter.
> >>
> >>
> >> >AlphaLabs has been known to modify their tri-field meter by
> >> >adding a large external probe. There are websites for
> >> >how to modify others yourself (linked from lessEmf).
> >> >Ideally you'd want something frequency weighted
> >> >(which the tri-field is) and able to up to high frequency, like
> >> >0.5 MHz (which the tri-field doesn't).
> >>
> >> You mean those antenna-like thingy that seems to be made out of PCB?
> >>
> >> kb
> >>
> >>
> >>
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >
>
>  
>