Posted by S Andreason on
URL: https://www.es-forum.com/Help-New-central-heating-Pump-tp3536341p3542550.html

Hi,
betty_starbuckle wrote:
> I have used the LF and RF meter on my machine and it does not register any higher
That's annoying. I know it is difficult to determine What is causing the
problem without having the right meter that can detect it.

Personally I would measure it with an Acoustimeter, and check for dirty
electricity with a GS meter.
If the magnetic field is "normal" and within a 6-12 ft radius, then the
problem must be some kind of RF.


> I have put layers of aluminium foil on the inside of the door which have made  negligible difference,
Suggests it might be in the wiring then. Like Bill suggested a noisier
kind of motor, I agree is a good possibility.


>  I really don't know what to do next. Stewart you mentioned carbon grounding ( ?) could you tell me what exactly that is and how it works?
>  
There is a "microwave absorber fabric" I bought from LessEMF last year,
that does make a difference, just not enough on a long term "solution".
We have hung sheets of it over the windows, and grounded them, so that
the neighbor's WiFi, which btw is back on as of this writing >:-( makes
the upstairs Tolerable, instead of Intolerable. Even for us, the only
effective solution will be to move.

It works by absorbing the microwave frequencies (cell phone, wifi, etc)
and directing the current to ground. Probably just like Y-shield paint.
And just like Loni's situation, it may not be a solution long term. I
think the EMR levels are just too high to live in a bubble in such areas
of high power density. Also, none of our efforts are addressing the
problem of energies on the quantum scale.

I feel like a lab rat.
Stewart

http://seahorseCorral.org/ehs1.html