Posted by
Loni Rosser on
URL: https://www.es-forum.com/RF-Meter-Question-tp3339716p3341039.html
Yes I'm not really sure if I need one that is ultra sensitive but I sure know that I am! Loni
--- On Thu, 9/15/11, emraware <
[hidden email]> wrote:
From: emraware <
[hidden email]>
Subject: [eSens] Re: RF Meter Question?
To:
[hidden email]
Date: Thursday, September 15, 2011, 8:06 PM
If it's primarily for personal detection & safety, I've found the Cornet to be very helpful-- and it's probably a lot cheaper. I saw Cornet meter on a video in stopsmartmeters.org, so apparently it can be used for smart meters as well.
However, as it's providing one number for a wide range of frequencies, I'm not sure how exactly it compares with official standards, so a more expensive meter might be good if you need a meter for more reasons than personal safety alone.
--- In
[hidden email], Loni <loni326@...> wrote:
>
>
>
>
>
>
>
>
>
>
> Â
> Please Advise!
> I am looking at these two meters? Is there any reason I might need the second one which is $500 or would the $200 be sufficient for cell radiation and basic troubleshooting?
> Â
> Loni
> Â
> Â
> Â
> The EMF Safety Superstore
> Radiofrequency Meters
> Best selection, great prices on Meters, Sensors, Alarms and Detectors for Microwave and RF Radiation
> Including Spectrum Analyzers, Cell Phone Detectors, Frequency Counters, Test Equipment
> RF METERS
> FOR DIGITAL & ANALOG SIGNALS
> Â
> 3-Axis RF Meter
> Perfect Low Cost Digital RF Meter
> Breakthrough in low cost RF measurement. Covers 50 MHz to 3.5 GHz and great for digital and analog RF signals. Use in 3-axis (isotropic) measurement mode or check each of the X,Y Z axis! Includes audio alarm with adjustable threshold and 200 point manual memory function. Extremely sensitive: 38 mV/m to 11 V/m (equivalent to .38 nanoWatt/cm² to 30 microWatt/cm²). 4-digit LCD display offers mV/m, A/m, W/cm², or W/m². Display resolution: 0.1mV/m, 0.1µA/m, 0.001µW/m², 0.001µW/cm². Updates 2.5 times per second. Choose to display instantaneous value, maximum value, or average. ±2.4dB accuracy or better. Great for cell tower and wi-fi measurements. Uses 9V battery. 1 yr factory warranty.
> Quick Start Instructions for 3-Axis RF Meter (pdf)
> 3-Axis RF Meter (Cat. #A495) ......... $199.95Â
> Â
>
> Â VIEW SHOPPING CART
> OR CHECK-OUT
> ORDERS: 8 8 8 - 5 3 7 - 7 3 6 3
> Outside USA: +1 - 5 1 8 - 4 3 2- 1 5 5 0
> Â
>
> Â
> 8 GHZ RF METER
> Very Wide Frequency Range
> Need to measure the new 5.8 GHz phones, baby monitors, DECT phones, wireless routers, surveillance bugs or other frequencies up to 8 GHz?
> This breakthrough in higher frequency RF measurement covers 10 MHz to 8 GHz and great for digital and analog RF signals. 3-axis (isotropic) measurement. Includes audio alarm with adjustable threshold and 99 point manual memory function. Extremely sensitive: 20 mV/m to 108 V/m (equivalent to 0.1 nanoWatt/cm² to 3 milliWatt/cm²). 4-digit LCD display offers V/m, A/m, W/m², or µW/cm². Choose to display instantaneous value, maximum value, or average. ±1dB accuracy or better. Uses 9V battery. 1 year factory warranty.
> 8 GHz RF Meter (Cat. #A489) ……… $499.00Â
> Â
>
> Â
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]