Posted by Howard McArthur on
URL: https://www.es-forum.com/Testing-electrosensitives-tp3195520p3200984.html

Hi Everyone: This document is one of the best that I have read on the topic Electro-sensitivities. I personally have MCS [ Multiple Chemical Sensitivities ] . In the past few years I have experience an decrease in my ability to tolerate DC Electro Magnetic Fields. I can detect the radiation from a conducted in which no current is flowing. I have done many experiments to determine that this is actually happening. For an old Electrician of about 40 years this was hard for me to believe as I have no problems with AC fields. Each time I conducted the test the results were the same.


Here is one of the experiments that I performed.

Purpose:
To measure the DC Static radiation that my body will tolerate.

Material List:
1 Bare [ Conductor ] Rod [ Copper or Steel ] about 7 ft  [ 2.13 meters ] long
1 Small jumper wire with alligator clips on each end.
1 9.0 Vdc. battery.
1 measuring tape 25 ft. [ 7.6 meters ] in length.

Experiment setup.
Select an area that has a minimum exposure to all types of external DC Electro Magnetic Fields.
Place the rod in a vertical position [ leaning against a wall will work ]
Using the jumper cable connect the positive [ + ] Terminal of the battery to the rod.

Conducting the test.
Step No.1  I would start walking slowly from a point 20 ft. [ 6.0 meters ] towards the energized rod.
Step No.2  While I am walking towards the rod I would try to determine at what distance I would begin to feel the effects to the radiation from the rod.
Step No.3 I would mark this point on the floor.
Step No.4 I would then measure and record the distance between my body and the energized rod.

Observation Results:
    As I walked slowly towards the rod at some point I would begin to feel the sensation to fall backwards. I would have to catch my self or I would land on the floor.

Computing the Experiment results:
I began to feel the DC radiation aprox. at a distance of 10 feet [ 3.04 meters ] from the DC + energized rod.
To obtain a value of the amount of energy that my body was exposed to I use a version on the " Inverse Square Law".

Formula used: Battery Voltage / (( distance ) sq.)  = the energy field strength that my body was exposed to
Calculation Example [ using my own test values ]     (Energy Source 9.0 Vdc.) / (Distance sq. = 100 ) = ( Radiated Energy .09 Vdc. ).

Conclusions of My Experiments" I concluded that if the energy field in the area of my body was greater that .09 Vdc I will become ill very quickly.

As I mentioned earlier I have Many Food and Chemical sensitivities. I have included a link to a video that describes how I test foods and chemicals to determine if I can actually tolerate them. I can also use this test to determine the polarity of a battery that is located inside a battery enclosure such as a watch battery.
My observations are as follows: if the pendulum rotate in a clockwise rotation the + [ positive ] terminal is the closest to the pendulum. if the pendulum rotate in a counter clockwise rotation the - [ negative ] terminal is the closest to the pendulum.
Please Take some time to work with these 2 experiments and post your findings.
http://www.youtube.com/watch?v=yV4_3a4eJD8 
If you have question and comments you may also send them to my personal email.
As Always: Howard. McArthur

[Non-text portions of this message have been removed]