Posted by
PUK on
Oct 01, 2010; 7:52am
URL: https://www.es-forum.com/Sleeping-directly-under-shielding-fabric-tp1608493p1613202.html
puk replies - maybe its the length of the wire which is acting as a
re-radiator for some signal somewhere ?
In a message dated 30/09/2010 19:32:42 GMT Daylight Time,
[hidden email] writes:
Hi again, All,
On a quest for some answers today.... I have recently had new wiring put
in and am having a problem with one circuit, which seemingly does not make
sense.....
It is a dedicated circuit for a washing machine. I noticed one night (by
turning circuits off until the offensive circuit was found) that this
circuit causes me ES symptoms. My electrician returned to check it out, along
with the local wiring inspector (it was the inspector who had the "bug"
detector which we used in last email). Anyway, they opened the circuit panel
and checked the connection--no problem. They opened the outlet cover and
looked there--no problem. What can the problem be? The circuit bothers me
unless it is off at the circuit box regardless of whether there is anything
plugged in to it or not. We have hospital grade metal clad wiring, btw.
Could something be wrong with the wire itself and cause a problem that
would lead to ES symptoms? The electrician and inspector just shrugged and
left. They told me to let them know if I figure out what the problem might
be. (Like I would know this stuff more than them,
eh? lol Geez...) My only guess is the ground wire inside the metal
shielding is damaged or somehow not correctly made. Would that cause a
problem resulting in ES symptoms? Could there be a situation in which the wire
could have gotten a kink in it that damaged it? Could a faulty dehumidifier
(the last thing plugged into that circuit) cause damage to the wire? (Now
know, to my knowledge, there is nothing wrong with this dehumidifier
except it does bother me ES-wise a bit.) Any ideas, Anyone?
Thanks,
Diane
--- On Thu, 9/30/10, Evie <_evie15422@yahoo.com_
(mailto:
[hidden email]) > wrote:
From: Evie <_evie15422@yahoo.com_ (mailto:
[hidden email]) >
Subject: Re: [eSens] Sleeping directly under shielding fabric?
To: _eSens@yahoogroups.com_ (mailto:
[hidden email])
Date: Thursday, September 30, 2010, 1:39 PM
Hi again, R and Andrew,
With the flaps out and emf fabric draped over the hammock, the fabric
would be about 2 feet away on all sides. Do you think this would be far enough
away, Andrew?
Diane
--- On Thu, 9/30/10, R. Ticle <_rticleone@yahoo.ca_
(mailto:
[hidden email]) > wrote:
From: R. Ticle <_rticleone@yahoo.ca_ (mailto:
[hidden email]) >
Subject: Re: [eSens] Sleeping directly under shielding fabric?
To: _eSens@yahoogroups.com_ (mailto:
[hidden email])
Date: Thursday, September 30, 2010, 11:30 AM
Hi Andrew,
Thanks for your thoughts. If I do end up trying it, I'll let you (all)
know. In the meantime, if anyone else has suggestions, too, I'd like to hear
them.
Thanks!
R.
--- On Thu, 9/30/10, Andrew McAfee <
[hidden email].com_
(mailto:
[hidden email]) > wrote:
From: Andrew McAfee <
[hidden email].com_ (mailto:
[hidden email]) >
Subject: Re: [eSens] Sleeping directly under shielding fabric?
To: _eSens@yahoogroups.com_ (mailto:
[hidden email])
Received: Thursday, September 30, 2010, 2:22 PM
I have had bad results if I let a metallic shielding fabric touch me
while I sleep. I think it is best to keep the fabric away from the skin.
If your blanket is think enough and doesn't conduct electricity, maybe
it will work. It is all up to how you feel.
There is an energetic layer of energy hovering around the body
(learned/saw this will studying at the Barbara Brennan School of
Healing) and I have found if silver mesh comes near it, my body gets
thrown out; fatigue, weird pains and sensations, tingling, sharp
pricks, heart weakness, etc.
Lead isn't a great RF blocker but I have found using a lead hat, I
have enough relief to sleep. I have yet to purchase a full body lead
apron.
If you can set up a structure around you that keep the RF shielding
fabric at least a few feet away that may produce better results.
Good luck and let me know what you find works. I am still experimenting.
Thank you,
Andrew
On Sep 30, 2010, at 10:10 AM, R. Ticle wrote:
> Hi people,
>
> Long time no typing. I might be helping someone move to an
> apartment tomorrow and may have to stay overnight. It's in a house
> at least, and they have no WiFi in the house itself, but it's in a
> suburban area of a city that has a lot of towers and such crap; I
> haven't checked the place ahead of time and will be bringing my
> meters with me.
>
> However, if I do have to stay overnight and want it to be a bit
> better, what are your thoughts on sleeping directly under the
> lightweight, mesh type RF shielding fabric (with it practically on
> top of my, separated by just a blanket)?
>
> What about it also covering my head/face?
>
> Is this a risk if, say, there's nothing conductive underneath me?
> Could I spread one of those metallic "emergency" blankets on the
> bottom underneath me and have the RF shielding mesh on top?
>
> Does it matter if it only covers my body and not my head?
>
> The only precautions I can think of are to avoid having it near any
> outlets or electronics to avoid picking up electric fields.
>
> I should mention that it would be unlikely that I could ground the
> fabric in such a quick, makeshift situation.
>
> If anyone would be kind enough to let me know what you think soon,
> I'd appreciate it, so I have the chance to prepare. Thanks kindly,
> and sorry if this has been covered on these lists before; I just
> don't have the head to go searching right now.
>
> Cheers,
>
> R.
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]