Posted by charles-4 on
URL: https://www.es-forum.com/Direct-Current-Power-Sensitivity-tp1554903p1554960.html

Hello,

such remarks occur wehen technicians try to unravel en reveil the secrets of electrosensitivity.

The imaginary potential is rather limited by technicians, becaus they only work with established laws, and are not capable in looking over the fence.

DC fields belong also to the elektrosmog family.

There are static magnetic fields.
They occor very often in metals parts of beds and in mattresses.
But also in metal supporting beams and in the steel armour of concrete.
(Also in underground water flows and earth beams, but in much smaller amounts and strength.)

And there are static electrical fields.
They can occur when certain surfaces are rubbed, like curtains or flooring.
Not only nylon can have this property, even wool carpets can have it.

Static electrical fields are measured with special meters, for instance an Elektrofeldmeter (according to the Feldmuehle principle).

I did measure a 9Volt blockbattery.
The plus pole showed 4 V, but the negative pole showed 34 Volts.

Fact is, that I have seen electrosensitives react to very tine fields or frequencies, which were very hard to measure.
Fact is, that i do know people who do react to cellphones in the pockets of passers by.

Most technicians do not want to discuss the occurring longitudinal waves, which do travel over much greater distances, where the transversal waves already have stopped.

Do not underestimate the power of fields.
If one connects a big battery to its body continuously, after two days one is dead.

Greetings,
Charles Claessens
member Verband Baubiologie
www.milieuziektes.nl
www.milieuziektes.be
www.hetbitje.nl
checked by Norton


----- Original Message -----
From: Howard McArthur
To: [hidden email]
Sent: Thursday, August 12, 2010 3:35 PM
Subject: [eSens] Re: Direct Current Power Sensitivity



Howard I am curious about your theory here. It is my understanding that "current" whether AC or DC
can't occur unless there is a completed circuit. Just holding a battery in the air, pointed at your
chest, shouldn't create a field until electrons move. Can't imagine how this would work. For
information, don't know if it has been discussed here... see the book "The Ion Effect" by Soyka
available at Amazon, which describes the very very ill effects of excess positive ions in the air
and which can be neutralized with a negative ion generator. Normally negative ions pop up into the
atmosphere from the earth where they abound, but since we cement over our planet with buildings and
roads the cities are depleted of negative ions and people are becoming very ill, dizzy, depressed,
anxious, a host of ill effects from just breathing pos-ions. Then, of course, with negative ions in
the air being wiped out by chemtrail debris falling to the earth (the neg-ions are attracted to the
particles and the charge is neutralized)... it's no wonder we are suffering from "E" sensitivity! We
are living in a soup of badly charged ions! Marji

Hi to Msrji and the Group.
The interesting point in my direct current sensitivity test is that there needs to be no current
flowing in the conductor for me to experience the presense of DC Energy. It appears that as long as
a single electrical conductor is energized by a DC source the resulting radiation surounding the
conductor is sufficient to obtain results from the test.
I am planning to perform a double blind DC Power Sensitivity test for the CR 4 group to prove that I
actually can or can not do what I claim. I expect to do the test in late Sept or early Oct. I will
be pleased to post details of how the test was conducted and the results obtained Good or Bad.
Howard
PS: Is there a Spell Checker that will work on these postings.



[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links





[Non-text portions of this message have been removed]