>
>
> Well, in the last couple of days, we built a "cage" around our couch. We
> made the frame out of PVC pipe 1/2". Took Reynolds Heavy Duty Aluminum foil
> and placed it under the couch on the floor, folding over twice and
> taping each seam with aluminum tape. We did this on the top, sides and
> ends. My Hubby had to of course help me in and close the one open end
> with me lying on the couch inside. I had my oxygen tubing so I was able
> to have enough air from the tank on the outside of the cage. Grounded
> it to a stake outside.
>
> IT WORKED!!!! We had three jets fly
> overhead several swoops and Very very VERY close. Made the house shake
> a little. (Maybe they didn't like the cage!) I didn't tremor nor did
> I get the jabbing chest pains! :)
> I was jittering inside some but did NOT tremor!
>
> It
> was tough to make b/c the foil easily has little pin holes poked
> through all over. I crawled inside and saw them all. :( So then I
> took some lighter duty foil and doubled up on the sides, top and one
> end. Hard to do the end I have to crawl through, but at least that
> took care of most of the pin holes.
>
> I had such a bad reaction to
> the Denny Foil we used last year that I was very skeptical that this
> would work. God answered our prayers. It did.
>
> SO, then for the trailer, we have to put in a vapor barrier yet anyway, so
> we should probably go ahead and use a product like the
> reflectix before the wall board? We're going to change our flooring
> and go with that aluminum tread solid stuff.
>
> What do you think?
> Kris
>
> [Non-text portions of this message have been removed]
>
>  
>