Posted by
K on
URL: https://www.es-forum.com/RADAR-HELP-tp1553465p1553558.html
Well, we had tried the Denny Foil. I chemically reacted to it. This is a two-story house so painting the attic is impossible since my bedroom is not under the attic. Plus, I am chemically sensitive and they Y-shield paint has not been recommended for me with my sensitivities. With that said, would that copper mesh be a success if I lined the walls, floor, and ceiling of the trailer besides the windows?
Or would solid aluminum instead of wallboard work and where would I get a product and how can I attach it/ seal it in the trailer without caulking? In other words, I have to seal what is in the walls( the insulation) but I am sensitive to caulk even the "Safe" stuff. We have steel studs about 2 feet apart and the rafters are 4 feet apart with solid pieces attaching each one.
Kris
________________________________
From: Bill Bruno <
[hidden email]>
To:
[hidden email]
Sent: Sat, April 17, 2010 11:34:41 AM
Subject: Re: [eSens] RADAR HELP!
Regular aluminum foil will block 77GHz. Heavy duty might be better, and is
easier to work with. Or a stronger product like astro-foil. At that
frequency it is very much line-of-sight, although there will be some
scattering from small metal objects like nails. I don't know if Y-shield
would help (I think it would, but they have no specs) but I would bet the
copper or aluminum paints would. If you have
a flat roof, you can get an aluminum coating painted on. I think
you'd also have good results with a radiant barrier in an attic.
For windows, you either need very fine mesh (like 200 wires per inch copper
from TWPinc.com) or metallic film (or foil, but then you can't see out).
On Sat, Apr 17, 2010 at 7:16 AM, K <
[hidden email]> wrote:
>
>
> Yes I am talking about the National Air guard Jets. I don't know if they
> are F-14's or if they're something else. I do know there is more equipment
> on these jets.
>
> I only have these symptoms at home when they fly.
>
> I have wondered about infrasound coming off the jets since I will start
> having symptoms before I hear them in the area. However, with the commercial
> airliner jets, I do associate the jabbing, stabbing chest pain every second
> until that jet passes overhead, I would suppose that is from their radar
> swoop?
>
> What kind of meter is going to measure that high? It's obvious my
> Electrosmog meter isn't high enough.
> Kris
>
> ________________________________
> From: S Andreason <
[hidden email] <sandreas41%40gmail.com>>
> To:
[hidden email] <eSens%40yahoogroups.com>
> Sent: Sat, April 17, 2010 12:26:33 AM
>
> Subject: Re: [eSens] RADAR HELP!
>
> K wrote:
> > I was educated yesterday by the lessemf.com guys that radar is at 77
> ghz.
>
> I'll just add, I really feel it when the military jets fly overhead. The
> other day I had the Acoustimeter out and was mapping the area up the
> hill. I could hear the jet coming on the meter first, then the sound
> arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky
> and not right overhead. Didn't hurt that far away, not too much.
>
> Anyways, since the meter only goes up to 8GHz, I think it emitted more
> than just "radar".
>
> Are you talking about U.S. planes?
>
> From what you described, I would tend to think there is something more
> in your area than just the jets, causing the heightened symptoms.
>
> Stewart
>
> ------------------------------------
>
> Yahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
[Non-text portions of this message have been removed]