>
>
> Hi Bill,
>
> Thanks for your thoughts on the shielding. Not sure if I understand this
> about the AM radio. what needs to be solved exactly and what would be
> buzzing after we paint?
>
> We're considering the VeilShield product sold at lessemf for the windows,
> maybe with some small magnets adhered to the window moulding to keep the
> mesh basically in place. We're not looking for 99.999 -- 99 is good enough.
> This mesh is a polyester material coated with a nickel-blackened copper
> finish. Virtually see through and unnoticeable from a distance.
>
> Best,
>
> Edo
>
>
> --- In [hidden email] <eSens%40yahoogroups.com>, Bill Bruno
> <wbruno@...> wrote:
> >
> > Another thing about shielding... first check with an AM radio to see if
> > there are any buzzes near where you are going to shield. Solve those
> first
> > or you will have the whole area buzzing.
> > Bill
> >
> > On Tue, Apr 13, 2010 at 10:22 AM, Bill Bruno <wbruno@...> wrote:
> >
> > > I think the paint has good properties, but it is true that
> > > removing it is a problem. Make sure you fill any cracks
> > > so you get a single conductive surface over the whole area.
> > > Leave some exposed someplace where you can install a
> > > dedicated ground rod; meanwhile ground it to your pipes
> > > or electric... and make sure you can experiment with grounded
> > > vs. non-grounded (don't paint close to anything that might
> > > create a shock hazard).
> > >
> > > The most cost efficient thing for windows is aluminum insect
> > > screen. You either need to bond it electrically with the paint,
> > > or have an overlap of several inches. You will see the levels
> > > improve maybe 99% reduction without overlap, but if the
> > > levels are bad you want to shoot for much better, like 99.99%.
> > >
> > > Don't paint another color over the y-shield until your readings
> > > are low enough... you may need to add a second coat.
> > >
> > > I know someone who used very fine stainless steel mesh on his windows.
> The
> > > films really are not as good, and bonding to the
> > > paint with film may not work (you have to bond it all the way
> > > around). There's a place in Berkeley, TWPinc.com that sells all kinds
> of
> > > mesh, including copper and bronze...
> > >
> > > B
> > >
> > >
> > > On Tue, Apr 13, 2010 at 9:49 AM, ada iye <betty_starbuckle@...>wrote:
>
> > >
> > >>
> > >>
> > >>
> > >>
> > >> Don't quote me on this but I read somewhere that using shielding
> paints
> > >> can infact intensify the signals in your room and make things worse.
> The
> > >> idea being that It can create a faraday cage with Emf signals trapped
> and
> > >> bouncing around inside. The fact that the paint is then not able to
> > >> be removed is also a negating factor in my opinion.. Maybe some one
> > >> else will verify this, but for me this has always been my sticking
> > >> point with regards to using the paints.
> > >>
> > >>
> > >> A
> > >>
> > >> --- On Wed, 14/4/10, edomor2 <edo@... <edo%40momoglass.com>>
> > >> wrote:
> > >>
> > >> From: edomor2 <edo@... <edo%40momoglass.com>>
>
> > >> Subject: [eSens] Help! Shielding house with Yshield paint, etc.
> > >> To: [hidden email] <eSens%40yahoogroups.com> <eSens%
> 40yahoogroups.com>
>
> > >> Date: Wednesday, 14 April, 2010, 1:29
> > >>
> > >>
> > >>
> > >>
> > >> Hi Everyone,
> > >>
> > >> We're 600 meters from a strong cell phone tower and the readings in
> the
> > >> house are not good.
> > >>
> > >> We're about to take the first steps towards shielding, beginning with
> the
> > >> bedroom. After some research we've decided on using the Yshield carbon
> > >> graphite paint for the walls, but are still undecided on what to do
> > >> regarding windows.
> > >>
> > >> Has anyone had any experience with Scotchtint, a film that is adhered
> to
> > >> the glass (sold by lessemf.com) ? All of this stuff is so pricey, and
> we
> > >> don't want to throw our money away with things that won't work.
> > >>
> > >> Also, any info/experience you have with the Yshield paint or with
> other
> > >> window alternatives (like Pilkington glass or fabrics) would be
> helpful as
> > >> well.
> > >>
> > >> Thanks for taking the time to read this,
> > >>
> > >> Edo
> > >>
> > >> [Non-text portions of this message have been removed]
> > >>
> > >>
> > >>
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>  
>