> From: charles <[hidden email]>
> Subject: Re: [eSens] Just had my EMF Levels checked by SDGE
> To: [hidden email]
> Date: Saturday, March 27, 2010, 1:11 PM
> No, when the wiring is right,
> microwave ovens do not show magnetic fields,
> when they are of..
>
> Greetings,
> Charles Claessens
> member Verband Baubiologie
> www.milieuziektes.nl
> www.milieuziektes.be
> www.hetbitje.nl
> checked by Norton
>
>
>
> ----- Original Message -----
> From: "Steve G" <[hidden email]>
> To: <[hidden email]>
> Sent: Saturday, March 27, 2010 9:05 PM
> Subject: Re: [eSens] Just had my EMF Levels checked by
> SDGE
>
>
> All microwaves give off emf when they are off as far as I
> know. The outlet
> is grounded because I tested it with a surge protector that
> has a wiring
> site fault light.
>
> --- On Sat, 3/27/10, charles <[hidden email]>
> wrote:
>
> > From: charles <[hidden email]>
> > Subject: Re: [eSens] Just had my EMF Levels checked by
> SDGE
> > To: [hidden email]
> > Date: Saturday, March 27, 2010, 11:46 AM
> > If the microwave oven gives off emf
> > even when its not on, than it is a
> > matter of grounding.
> >
> > The electrical wiring is not grounded.
> >
> > Greetings,
> > Charles Claessens
> > member Verband Baubiologie
> > www.milieuziektes.nl
> > www.milieuziektes.be
> > www.hetbitje.nl
> > checked by Norton
> >
> >
> >
> > ----- Original Message -----
> > From: "Steve G" <[hidden email]>
> > To: <[hidden email]>
> > Sent: Saturday, March 27, 2010 7:06 PM
> > Subject: Re: [eSens] Just had my EMF Levels checked
> by
> > SDGE
> >
> >
> > He said it was from the fridge. The compressor was on
> when
> > he did the
> > reading. Also the microwave oven gives off emf even
> when
> > its not on.
> > Would adding a good surge suppressor help with the
> fridge?
> >
> > --- On Sat, 3/27/10, Bill Bruno <[hidden email]>
> > wrote:
> >
> > > From: Bill Bruno <[hidden email]>
> > > Subject: Re: [eSens] Just had my EMF Levels
> checked by
> > SDGE
> > > To: [hidden email]
> > > Date: Saturday, March 27, 2010, 10:48 AM
> > > And by the way, 1.24 in the kitchen
> > > sounds terrible.
> > > Stetzer filters will not solve that (although
> > reducing
> > > dirty
> > > power in that situation is a good idea). Figure
> out
> > > the
> > > cause of that. If it goes away with everything
> off
> > > (try the
> > > lights first) then it's probably a wiring error.
> If
> > > you have
> > > two switches controlling the lights, probably
> the
> > white
> > > neutral wires from two circuits are connected
> > somewhere.
> > > This is usually (but not always) easy to fix.
> > >
> > > The power company guy ideally would have
> commented
> > > on this...but their bible says anything under
> 1000 mGa
> > is
> > > safe.
> > >
> > > Bill
> > >
> > > On Sat, Mar 27, 2010 at 11:43 AM, Bill Bruno
> <[hidden email]>
> > > wrote:
> > >
> > > > 0.3 milligauss is not terrible, but for
> someone
> > who is
> > > sensitive
> > > > it's really not great, especially if there
> is
> > dirty
> > > power on the line.
> > > >
> > > > It would probably make sense to have a
> plumber
> > put a
> > > > dielectric union or short piece of plastic
> > ("pex")
> > > tubing
> > > > anywhere in that copper pipe. Or disconnect
> the
> > > loop it's
> > > > forming (could be a dishwasher or fridge
> with ice
> > make
> > > doubly
> > > > grounded). Or, in some cases you can
> > > add a copper wire
> > > > connected to the pipe at both ends, and
> running
> > along
> > > > the path that completes the loop. This is
> hard
> > > to explain
> > > > in words, but given a choice most of the AC
> > current
> > > will go
> > > > through a small loop rather than a large
> one, if
> > you
> > > can get
> > > > the small one really tiny (think twisted
> pair)
> > it
> > > could be
> > > > fairly effective. But just breaking the loop
> is
> > > always most effective.
> > > >
> > > > On Sat, Mar 27, 2010 at 8:45 AM, Steve G
> <[hidden email]>
> > > wrote:
> > > >
> > > >>
> > > >>
> > > >> I just called and said I was concerned
> about
> > EMF
> > > levels. They were very
> > > >> understanding (although they are
> installing
> > smart
> > > meters so I guess their
> > > >> level of understanding has limits).
> They
> > sent
> > > someone out to read my apt and
> > > >> outside the building. They are pretty
> good
> > about
> > > this stuff-they check out
> > > >> my gas appliances for free every
> winter.
> > > >>
> > > >> --- On Sat, 3/27/10, Jennie Wassenaar
> > > >> <[hidden email]<ad-in%40ameritech.net>>
> > > >> wrote:
> > > >>
> > > >> > From: Jennie Wassenaar <[hidden email]
> > > <ad-in%40ameritech.net>>
> > > >>
> > > >> > Subject: Re: [eSens] Just had my
> EMF
> > Levels
> > > checked by SDGE
> > > >> > To: [hidden email]
> > > <eSens%40yahoogroups.com>
> > > >> > Date: Saturday, March 27, 2010,
> 5:56 AM
> > > >>
> > > >> > How did you get someone from the
> > > >> > utility company to come out and
> check
> > you EMF
> > > levels?
> > > >> >
> > > >> > Thanks,
> > > >> >
> > > >> > Jennie
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> > ________________________________
> > > >> > From: torch369 <[hidden email]
> > > <torch369%40yahoo.com>>
> > > >> > To: [hidden email]
> > > <eSens%40yahoogroups.com>
> > > >> > Sent: Thu, March 25, 2010 4:49:27
> PM
> > > >> > Subject: [eSens] Just had my EMF
> Levels
> > > checked by SDGE
> > > >> >
> > > >> >
> > > >> > My local utility sent someone out
> to
> > check my
> > > EMF Levels in
> > > >> > my apt, garage and surrounding
> area.
> > > >> > They actually checked out pretty
> good,
> > > according to him for
> > > >> > an apt. they were very good.
> > > >> > Garage was .32. The only bad spots
> were
> > a
> > > copper pipe
> > > >> > running across the wall but when he
> put
> > the
> > > device closer to
> > > >> > the ceiling (under my bedroom) it
> > dropped
> > > off.
> > > >> > Front Door was .36.
> > > >> > Living Room was .48
> > > >> > Kitchen was 1.24
> > > >> > Bedroom was .48
> > > >> > Dining Room was .80
> > > >> >
> > > >> > The one item I own that he said was
> too
> > high
> > > was the small
> > > >> > air cleaner I use to drown out
> outside
> > > noises. This had read
> > > >> > high also on my little $30
> Cellsensor so
> > that
> > > Meter was a
> > > >> > good buy. Where it was located
> still
> > showed a
> > > high level by
> > > >> > my feet but it was OK by my head
> and
> > body.
> > > Its amazing how
> > > >> > much EMF that little cleaner
> throws
> > off.
> > > >> > So, now I know it isn't so bad in
> here.
> > Not
> > > going to try
> > > >> > the stetzer filters, going to
> return
> > the
> > > stetzerizer meter,
> > > >> > and going to try some of those
> Quantum
> > > strips/outlets like I
> > > >> > said I was. Seems to be the way to
> go I
> > > think.
> > > >> >
> > > >> > Now, if anyone knows of a good
> white
> > noise
> > > machine or
> > > >> > something that can drown out
> outside
> > noises
> > > so I can replace
> > > >> > that air cleaner I'd love to hear
> about
> > it.
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> > [Non-text portions of this message
> have
> > been
> > > removed]
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> ------------------------------------
> > > >> >
> > > >> > Yahoo! Groups Links
> > > >> >
> > > >> >
> > > >> > [hidden email]<eSens-fullfeatured%40yahoogroups.com>
> > > >> >
> > > >> >
> > > >> >
> > > >>
> > > >>
> > > >
> > > >
> > >
> > >
> > > [Non-text portions of this message have been
> removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > > [hidden email]
> > >
> > >
> > >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> > [hidden email]
> >
> >
> >
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>     [hidden email]
>
>
>