> From: Bill Bruno <[hidden email]>
> Subject: Re: [eSens] Just had my EMF Levels checked by SDGE
> To: [hidden email]
> Date: Saturday, March 27, 2010, 10:43 AM
> 0.3 milligauss is not terrible, but
> for someone who is sensitive
> it's really not great, especially if there is dirty power
> on the line.
>
> It would probably make sense to have a plumber put a
> dielectric union or short piece of plastic ("pex") tubing
> anywhere in that copper pipe.  Or disconnect the loop
> it's
> forming (could be a dishwasher or fridge with ice make
> doubly
> grounded).   Or, in some cases you can add a
> copper wire
> connected to the pipe at both ends, and running along
> the path that completes the loop.  This is hard to
> explain
> in words, but given a choice most of the AC current will
> go
> through a small loop rather than a large one, if you can
> get
> the small one really tiny (think twisted pair) it could be
> fairly effective.  But just breaking the loop is
> always most effective.
>
> On Sat, Mar 27, 2010 at 8:45 AM, Steve G <[hidden email]>
> wrote:
>
> >
> >
> > I just called and said I was concerned about EMF
> levels. They were very
> > understanding (although they are installing smart
> meters so I guess their
> > level of understanding has limits). They sent someone
> out to read my apt and
> > outside the building. They are pretty good about this
> stuff-they check out
> > my gas appliances for free every winter.
> >
> > --- On Sat, 3/27/10, Jennie Wassenaar <[hidden email]<ad-in%40ameritech.net>>
> > wrote:
> >
> > > From: Jennie Wassenaar <[hidden email]
> <ad-in%40ameritech.net>>
> >
> > > Subject: Re: [eSens] Just had my EMF Levels
> checked by SDGE
> > > To: [hidden email]
> <eSens%40yahoogroups.com>
> > > Date: Saturday, March 27, 2010, 5:56 AM
> >
> > > How did you get someone from the
> > > utility company to come out and check you EMF
> levels?
> > >
> > > Thanks,
> > >
> > > Jennie
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > ________________________________
> > > From: torch369 <[hidden email]
> <torch369%40yahoo.com>>
> > > To: [hidden email]
> <eSens%40yahoogroups.com>
> > > Sent: Thu, March 25, 2010 4:49:27 PM
> > > Subject: [eSens] Just had my EMF Levels checked
> by SDGE
> > >
> > >
> > > My local utility sent someone out to check my EMF
> Levels in
> > > my apt, garage and surrounding area.
> > > They actually checked out pretty good, according
> to him for
> > > an apt. they were very good.
> > > Garage was .32. The only bad spots were a copper
> pipe
> > > running across the wall but when he put the
> device closer to
> > > the ceiling (under my bedroom) it dropped off.
> > > Front Door was .36.
> > > Living Room was .48
> > > Kitchen was 1.24
> > > Bedroom was .48
> > > Dining Room was .80
> > >
> > > The one item I own that he said was too high was
> the small
> > > air cleaner I use to drown out outside noises.
> This had read
> > > high also on my little $30 Cellsensor so that
> Meter was a
> > > good buy. Where it was located still showed a
> high level by
> > > my feet but it was OK by my head and body. Its
> amazing how
> > > much EMF that little cleaner throws off.
> > > So, now I know it isn't so bad in here. Not going
> to try
> > > the stetzer filters, going to return the
> stetzerizer meter,
> > > and going to try some of those Quantum
> strips/outlets like I
> > > said I was. Seems to be the way to go I think.
> > >
> > > Now, if anyone knows of a good white noise
> machine or
> > > something that can drown out outside noises so I
> can replace
> > > that air cleaner I'd love to hear about it.
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been
> removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >     [hidden email]<eSens-fullfeatured%40yahoogroups.com>
> > >
> > >
> > >
> > 
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>     [hidden email]
>
>
>