Re: Y-shield paint grounding help
Posted by
sweetchild323 on
URL: https://www.es-forum.com/Y-shield-paint-grounding-help-tp1549132p1549188.html
--- In
[hidden email], Bill Bruno <wbruno@...> wrote:
>
> I should add that inductive style filters might help. If you have a
> computer or something,
> an inductance to isolate it might help. But it's not easy to get it right,
> and
> if you're really sensitive it will take a whole lot of filtering to get it
> to where it
> won't bother you.
> RadioShack sells an inductive choke (part 273-104) you could wrap wires on.
>
> Bill
>
>
> On Sat, May 2, 2009 at 3:00 PM, Bill Bruno <wbruno@...> wrote:
>
> > Just avoid using all switching power supplies (almost all new AC
> > electronics).
> > I don't think the Stetzers will help with your ground wire. The meter
> > doesn't
> > measure that--it really only measures the hot relative to neutral. It's a
> > major
> > deficiency in that system.
> >
> > Putting some in certain places might help you, but won't clean up your
> > ground.
> > If anything the ground will be worse because a Stetzer sends the dirty
> > power
> > on the hot to the neutral, which is bonded to the ground.
> > Bill
> >
> >
> > On Fri, May 1, 2009 at 9:57 PM, sweetchild323 <sweetchild323@...>wrote:
> >
> >>
> >>
> >> I coudnt find exacly where its grounded, so instead what me and Mr. Gust
> >> Decided to do is clean up the electricity in the house with stetzer filters
> >> that way it would eliminate any dirty electricty the paint is picking up
> >> from being grounded to the house ground, I have to buy a stezerizer meter
> >> and filters now, ufortunetly this will ad alot to the cost, but I hopeit
> >> will make the differnce Im hoping it to make.
> >>
> >>
> >>
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
Since the neutral and and the ground are bonded together wouldnt the meter pick up the dirty electricity in the ground?
I dont know alot about stetzer filters but I just thought it turned the dirty electricity into heat or something lol.
I was going to hire en eletrician to put outlets direct from the main to filter the electricity coming in from outside.
If this is true then theres no point doing this if theres still going to bedirty electricity coming from the ground connection, I emailed the stetzercompany just to be sure of this.
I guess I might have to rethink what Im going to do, if it comes down to stripping some of the paint of the wall to find the ground then ill have to do that.
Cristian