Posted by
rowster_c on
Sep 15, 2007; 7:42pm
URL: https://www.es-forum.com/stellite-television-provider-close-to-home-tp1545026p1545113.html
--- In
[hidden email], "Bill Bruno" <wbruno@...> wrote:
>
> Can someone tell me what they mean by longitudinal waves?
>
> What I learned is that Maxwell's equations has wave solutions
> that can be in one of two polarizations (or a combination,
resulting,
> depending on the phase, in circular polarization).
>
Hello Bill,
Sorry about delay in answering this, busy packing and
setting up current clamp plus wire breakout accessory
so I can measure Pos neutral earth separately at an
outlet. Answer is in rough form for physics types and
long. Some of it will be wrong and probably full of
inaccurate suppositions.
Modern electrical engineering and electron behaviour
is largely based no Maxwell's equation. When
Maxwell did his work, he didn't use the current
equations, he drew diagrams of hexagons, and models
where the electron moved by vortices, and spun on
ball bearings called idlers. Equations too complicated,
involved quaternions I think.
Equations were too complex. His contemporaries
realised he was right and distilled them down into the
current equations which are held correct, done I think
by Heaviside. Some people claim they are incomplete
however. The vortices were dropped. Some recent
work has been done on non linear Maxwell equations,
not big.
The basic form of the electron wavicle involves
magnetic fields being perpendicular to electric. In the
circular polarised form the electron spins along as
either a helix or a twisted bit of pasta, I can't
remember which- that is either the edge of the twisted
bit of pasta or the surface. There are other models
more accurate. In the E polarised or the H polarised
form, it is squashed flat, moving diagonally side to
side across a plane. Each movement is electron is
made up of a left then a right, like a zigzag shape
when linearly polarised. Or something like the above.
When the waves are given off antennas, they can be
ring vortices, like smoke rings, or a number of other
patterns, all solutions of Maxwell's equation.
Considering superconductors, the vortices, the left
and right halves of each electron movement, become
more important and spiral patterns can be seen. It is
interesting to note that the patterns claimed to be seen
by some dowsers, such as in the book at
http://www.geopathfinder.com , are identical at the
large scale (1 km) on the earth's surface, to the tiny
patterns seen with equipment in a superconductor (1
nm ish)- the vortices come out.
Some people concentrated on the vortices and said
Maxwell's equations weren't good enough, omitting
part of the electron's movement. They said there was
more than just a helix component of 2 halves in each
electron, there was other stuff called the 'scalar' or
longitudinal component. Tesla worked on this after
Maxwell and used the scalar component to transmit
energy wirelessly over significant distances, not using
the rudimentary energy capture method used by some
RFID tags. This tech is being rediscovered , not in the
old fashioned way of RFID tags or electric
toothbrushes I think, which is via near field magnetic
coupling.
Pr Meyl of Germany has been getting stuck in. See
http://www.meyl.eu : He sells expensive kits where
helicopters fly powered by scalars. See written book
and papers all described at his site. He say's he
rewrites Maxwell's equations using Faraday's law to
add extra term. I can't understand equations any more
so I can't check it. Brain is a bit dimmer now.
When an object moves at different speeds in different
media it can go through phase changes to different
movement patterns. Like cigarette smoke curling or
moving as rings. When elec moves down wire it can
switch from helix to 'longitudinal section electric or
magnetic wave', when the wire is next to insulator
and goes through thickness changes and intersections
I think I read. See physics papers.
Meyl, Tesla, etc, claim there is more than just long
section elec. Considering different elec types, pi,
sigma, 2s 2p they are all different forms. Now I
haven't followed this bit yet, but I think Pr Meyl is
saying a longitudinal wave is a neutrino or a solution
to the new they call expanded Maxwell's equations.
Bound to be disagreement I expect. Nevertheless,
there are papers in Physical Review I think discussing
longitudinal section elec waves passing through and
interacting with crystals (quartz?). This might
correlate with the remarks by Charles (when he is in a
good mood) and others of the crystals soaking up
scalar 'energy' and needing to be rested or discharged
or something. There may be something to this new
age crystal stuff. Claims that these scalars aren't
affected by Faraday cage effect.
Not knowing too much I think the scalar equations
might be related to the convection, displacement
current, or vortex motion or something. Some
websites claim scalar detectors that weigh a tonne.
Physicists put in a big effort to detect a handful of
neutrinos.
If we assume that electricity moves in different
patterns at different speeds or rather accelerations,
these scalars might be inclined to pop out under
acceleration or deceleration. Could be wrong but
hazard a guess that whenever electron is accelerated
nonlinearly, or particularly passes through a
SEMICONDUCTOR, and gets dragged at different
rates, maybe it could pump out scalars. This doesn't
violate Einstein's going faster than the speed of light
due to the group velocity phase velocity I think.
Every computer is run on semiconductors. You can
easily see how they are involved with the established
long section elec/mag waves, so why not scalars. So
some people say that it is the scalars and their
'information content' coming from electronic gadgets
that affect electrosensitives, and that the E, H fields
are just a side issue. Others have less faith. But a
number of reports on eSens indicate response to
devices that claim to alter scalars, such as bioprotect,
I think springlife polarizer etc.
Example of semiconductor producing illness is the
dental amalgam probably. I read on an internet
newsgroup that the cause of a few people hearing
radio from their fillings is the 'rusty nail effect' from
EMC. Filling forms a layer of rust on surface, a
semiconductor. Radiation from device hits rusty
filling, produces flow of electron current due to the
voltage ? difference across semiconducting tarnished
surface (demodulation), which further tarnishes
surface, releases nasty chemicals, and they now
suggest also emits 'scalars', like having a scalar
emitter in your head. See 'rusty nail' and
'electromagnetic compatibility'. Not where I saw it
but it is mentioned here:
http://answers.google.com/answers/threadview?id=367925 Fillings rusting is more than century old
problem. Might explain why stainless steel hip joints
don't seem to be producing reports of
electrosensitivity because they are not
semiconductors. Thus the models of model implants
are faulty because the don't take into account power
loss when wave hits semiconductor.
It would be good if these scalar device absorber
builders would placebo control blind trial their
devices on 30 people at a time military fashion so we
could more info and then push further with the
research if necessary. So I was thinking if water
absorbs scalars not using a Faraday cage effect it may
be better than just bioprotects alone in front of a
computer screen, and I wish the device builders would
front up a bit more of their info and get things
moving
Prof Meyl's book has it all at his site.
Regards,
Rowan C.