Posted by Emil at Less EMF Inc on
URL: https://www.es-forum.com/EMF-tp1540535p1540573.html

Start by determining what type of EMF you have:

Magnetic field?
Electric field?
Radiofrequency (microwave)?

Second, determine the source(s) of the field present in your location. (It
is often easier to shield/change the source, rather than shield/change the
area you want to protect).

You will need a meter to accomplish this. This meter will also be useful
after you do your mitigation to make sure you have achieved what you set out
to do.


With this information, you will have the following choices:

1] turn off, discard, or replace high EMF sources
2] increase your distance from high EMF sources
3] use appropriate shielding for any remaining sources
Most electric fields and RF/MW can be shielding with grounded,
conductive materials such as fabrics, paints, and plastics
Magnetic shielding is possible but trickier, since size, shape and
position of the magnetic shieldoing are as important as the selection of the
proper materials.

Since the possible combinations of circumstances are limitless, I cannot
give you more specifics here. But I will be happy to provide further
guidance for any specific situation you may have.

Best regards,

Emil DeToffol
Less EMF Inc. (www.lessemf.com)
tel: +1-518-432-1550
e-mail: [hidden email]

----- Original Message -----
From: "christina2005r" <[hidden email]>
To: <[hidden email]>
Sent: Friday, February 10, 2006 8:19 PM
Subject: [eSens] EMF