Posted by
Andrew McAfee on
URL: https://www.es-forum.com/reply-to-Quaixeman-re-ground-current-tp1539212p1539218.html
My training with Slim Spurling has taught me that the Hartman Lines
http://educate-yourself.org/cn/geobiology29mar04.shtmlor the energy/electrical/geopathic stress lines that the electricity
uses to return to "base" may cause those readings or symptoms.
You can find those line predictably every 5-6 feet or so with dowsing
in a grid pattern.
I turned all the power off in my house and I still get a body voltage
reading in my living room. With dowsing, I found the lines and laid
copper rods to block them and it seems to help a little. I need to do
more investigating because they are not all gone.
At his workshop, Slim showed us how to block geopathic lines, Hartman
lines, or detrimental lines that cross our homes, beds, property etc.
by laying and burying copper rods horizontally at the property line.
I am not 100% that it works but I do see immediate improvement in the
dowsing rods when I take blind measurements.
So, learning how to dowse may be helpful to find these lines and lay
down some copper welding rods and see if it makes a difference. Be sure
to ask the rods which direction it is flowing (usually from the South
and West to the East and North for some reason) so you can block or
redirect the energy around your property before it goes through the
house rather than blocking it in your house.
Andrew
On Aug 21, 2005, at 7:10 PM, quaixemen wrote:
> Thank you so much for that information. May I ask, if it is not a
> good idea to ground to ground rods in the ground such things as
> faraday cages and I-beams under trailers, is there a place that is a
> good idea to ground? I am almost certain there is a ground current
> on my floor. I have no idea where it is coming from though. Only
> speculation that there is a ground current in the ground. I will be
> looking into those devices that you mentioned. I have to find out
> where it is coming from and solve this problem I am having before I
> have a stroke. Thanks again.
>
>
>
> --- In
[hidden email], SArjuna@a... wrote:
>>
>> Quaixeman wrote:
>>> I would not be surprised if
>>> there is a good ground current going through the ground here. I
>>> think I have a ground current on the floor of my house. I don't
> know
>>> if I am helping or hurting by grounding all the I-beams and
> aluminum
>>> siding and roof . I don't know much about it but I would like to
>>> investigate this more and hopefully solve the problem. I would
> like
>>> to check my perceived ground current in my house floor.
>>>
>> Shivani replies:
>> If you have current on the ground and you ground the things
> that you
>> mention you have, you are giving the high frequencies free access
> via items and
>> they are now broadcasting the damaging frequencies throughout your
> living
>> space.
>> You can have someone come with an oscilloscope and read what
> is on your
>> ground, your beams, etc. You can also buy a clamp-on ampmeter
> and take
>> readings on your pipes, beams, etcetera yourself. If there is
> current on these,
>> you can bet it contains the same high frequencies that you found in
> your
>> circuits.
>> In the US today it is no longer safe to ground to ground/terra
> firma.
>> Some individuals grounding earth tethers, faraday cages, etc. have
> made
>> themselves very ill doing this.
>> High frequency electrical fields on your floor can also be
> caused by
>> having high frequency current on water pipes, phone or tv lines
> that are running
>> under the floor. Remember that the high frequencies are subject
> to the
>> "skin effect," so they tend to spread out over surfaces that you
> would not
>> ordinarliy consider conductive.
>> Regards,
>> Shivani
>>
>>
>> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>