Mobius strips

> This article http://tinyurl.com/2z8q9 says:
>
> "In the mid 1980s a commercial device (Teslar Shielding Device) became
> available which utilized a mobius coil. The device was based on a
> patent which used a mobius strip in a crystal oscillator circuit."
>
> Here is some info from an ES person who used a special mobius coil for
> protection:
>
> http://educate-yourself.org/dc/spindex.shtml
>
> but this coil MUST be wound around a quartz crystal, or it will do
> nothing but make you sick!
>
> Just mail me if you want instruction in winding this kind of coil.
>
> If you have any info about mobius strips, please post them here or
> mail me.
>
> --- In [hidden email], "Ray Kosan" <rkosan@...> wrote:
> >
> > Hi:
> > Has anyone had any experience using Mobius strips to reduce the
> effects of electropollution?
> > As far as I know the only commercially available strips are found in
> Teslar watches.
> > Are there other sources?
> >
> > Thank you
> > Ray
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

> oscillator circuits with crystals as described in one of your references
> could be substantially greater. The 2002 prices are quite reasonable and
> instructions are provided for winding your own coils.
> The Caduceus and bifilar coils described by Glen Rein may also be worth
> looking into.
> Again many thanks for your response.
> Ray
> ----- Original Message -----
> From: "elihme" <elihme@...>
> To: <[hidden email]>
> Sent: Monday, November 13, 2006 12:01 PM
> Subject: [eSens] Re: Mobius strips
>
>
> > This article http://tinyurl.com/2z8q9 says:
> >
> > "In the mid 1980s a commercial device (Teslar Shielding Device) became
> > available which utilized a mobius coil. The device was based on a
> > patent which used a mobius strip in a crystal oscillator circuit."
> >
> > Here is some info from an ES person who used a special mobius coil for
> > protection:
> >
> > http://educate-yourself.org/dc/spindex.shtml
> >
> > but this coil MUST be wound around a quartz crystal, or it will do
> > nothing but make you sick!
> >
> > Just mail me if you want instruction in winding this kind of coil.
> >
> > If you have any info about mobius strips, please post them here or
> > mail me.
> >
> > --- In [hidden email], "Ray Kosan" <rkosan@> wrote:
> > >
> > > Hi:
> > > Has anyone had any experience using Mobius strips to reduce the
> > effects of electropollution?
> > > As far as I know the only commercially available strips are found in
> > Teslar watches.
> > > Are there other sources?
> > >
> > > Thank you
> > > Ray
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>

> Your mobius strips are made from some kind of foam rubber strip? I had
> expected an electrically conductive material.
>
> Could you give some details - like brand name, or if it is latex or
> neoprene rubber?
>
> Did you glue the ends together end to end, or with overlap?
>
> --- In [hidden email], "Ray Kosan" <rkosan@...> wrote:
> >
> > Thank you for the two fascinating references.
> > My main problems are energy depletion and headaches when working with a
> > desktop or laptop for more than an hour.
> > I tried wearing a Teslar watch about one year ago for a couple of
> weeks and
> > again recently. It did not make a noticeable difference.
> > Using foam strips (1/2 inch wide) I've made some simple mobius
> strips (about
> > 3"x6").
> > These I tested using a pendulum and muscle testing to determine the
> > "positive" and "negative" sides of each strip. I've found that placing a
> > strip in my upper shirt pocket with the positive side facing my body
> does
> > have an effect. My energy level is greater and the headaches less
> after two
> > plus hours in front of the same computers. All else is the same.
> Maybe its
> > just a placebo effect - who cares as long as it works.
> > These are simple passive strips so the effect of those incorporated
> into
> > oscillator circuits with crystals as described in one of your references
> > could be substantially greater. The 2002 prices are quite reasonable and
> > instructions are provided for winding your own coils.
> > The Caduceus and bifilar coils described by Glen Rein may also be worth
> > looking into.
> > Again many thanks for your response.
> > Ray
> > ----- Original Message -----
> > From: "elihme" <elihme@...>
> > To: <[hidden email]>
> > Sent: Monday, November 13, 2006 12:01 PM
> > Subject: [eSens] Re: Mobius strips
> >
> >
> > > This article http://tinyurl.com/2z8q9 says:
> > >
> > > "In the mid 1980s a commercial device (Teslar Shielding Device) became
> > > available which utilized a mobius coil. The device was based on a
> > > patent which used a mobius strip in a crystal oscillator circuit."
> > >
> > > Here is some info from an ES person who used a special mobius coil for
> > > protection:
> > >
> > > http://educate-yourself.org/dc/spindex.shtml
> > >
> > > but this coil MUST be wound around a quartz crystal, or it will do
> > > nothing but make you sick!
> > >
> > > Just mail me if you want instruction in winding this kind of coil.
> > >
> > > If you have any info about mobius strips, please post them here or
> > > mail me.
> > >
> > > --- In [hidden email], "Ray Kosan" <rkosan@> wrote:
> > > >
> > > > Hi:
> > > > Has anyone had any experience using Mobius strips to reduce the
> > > effects of electropollution?
> > > > As far as I know the only commercially available strips are found in
> > > Teslar watches.
> > > > Are there other sources?
> > > >
> > > > Thank you
> > > > Ray
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

>Are you sure it is not the flat coil you are looking for? Can't
>recall the name at the moment, but it is just that, a wire coiled
>round and round itself, totally flat?
>
>~ Snoshoe
>
>--- In [hidden email], "Ray Kosan" <rkosan@...> wrote:
> >
> > Hi:
> > I've tried only non conductive materials - strips cut from sheets
>of foam
> > and also from stiff paper but the latter is a bit more difficult to
>work
> > with.
> > The foam sheets were purchased from a craft store. I do not know
>what they
> > are made of but they are quite common and inexpensive ( about $1.00
>for
> > 10"x16" sheet). Strips were cut 1/2" wide by 12" long. The ends
>were held
> > loosely together with one hand while the remaining strip was
>twisted 180
> > degrees with the other hand to give the figure 8. The two ends were
>then
> > taped together with scotch tape with no overlap. That's it.
> > As mentioned earlier one side of the figure 8 gives a strong
>positive
> > response when tested with a pendulum or with a muscle test and when
>the
> > strip is flipped upside down then strong negative responses are
>obtained.
> > Hope this helps.
> > Ray