Graham Stetzer readings up?

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Graham Stetzer readings up?

SArjuna
Many people have reported, over the past 3 days, that their electrical
pollution levels (as seen on oscilloscope or Graham Stetzer meter) are way
up. We suppose this is due to the military having all their radar, etc.
cranked to the max for the anniversary of 9/11, and hope they turn it down to
normal again soon.
I'd be interested in hearing from folks in different parts of the USA
about their electrical pollution levels and symptoms over the past 3 days or so.
Regards,
Shivani
www.LifeEnergies.com


[Non-text portions of this message have been removed]

Reply | Threaded
Open this post in threaded view
|

Re: Graham Stetzer readings up?

Stewart A.
Hi,

The GS readings here have been up for at least a month.
Looking back in my logs,
2006.Feb was 34-36 with no filters and everything off. "PUD baseline."
at which time I had 4 filters installed at key locations of noisy
equipment, (like 2 for the computer, mostly off of course). Any more
than that and the GS would go up.

next record (of GS) is Aug.26, at which time I suspected something
"else" was higher.
GS = 53 to 84 maximum spike, without filters, and 55-68 with the 4 filters.

I ordered more filters, and 2 days ago tried to find locations that
would bring down the readings.
GS = black phase: 47-49 with mains off, and 52-62 on red phase with
mains off.
black 54-59 with 4 filters
adding more 8 filters, with some at the PUD panel, did not lower the
readings... instead they went up, and we felt worse.

Changes in the area I know of:
wireless internet 8 miles away, very hot and painful in radius of 2Mi
from tower,
it is also noisy in mom's ears, with rash returning, over the last 2 months.
(We moved here to get away from towers...) :(

It has also been very dry here. extreme fire danger and all the fires in
WA state have been the news.

Putting on my speculation hat;
could the lack of ground cause the filters to not work well?

When we get rain, I hope to be able to answer that.
So nothing spiking in the last 3 days here, in NE WA.

Stewart
http://www.geocities.com/sandreas41

--
The safest modification you can make to your cell phone is with a hammer.

--
[hidden email] wrote:

> Many people have reported, over the past 3 days, that their electrical
> pollution levels (as seen on oscilloscope or Graham Stetzer meter) are way
> up. We suppose this is due to the military having all their radar, etc.
> cranked to the max for the anniversary of 9/11, and hope they turn it down to
> normal again soon.
> I'd be interested in hearing from folks in different parts of the USA
> about their electrical pollution levels and symptoms over the past 3 days or so.
> Regards,
> Shivani
> www.LifeEnergies.com
>
>

Reply | Threaded
Open this post in threaded view
|

Re: Graham Stetzer readings up?

Andrew McAfee
I don't know about the readings getting higher. I do know about feeling
worse with more filters. In my latest house, the neutral wire was not
correctly connected in many of the switches which caused an overload of
the neutral wire with the added GS filters.
The problem was corrected by getting an expert in who knew how to
balance the wires.
Check your wiring with a gauss meter and see if magnetic fields
increase as you add the GS meters. If so, you may have a neutral wire
problem.
Andrew
On Sep 14, 2006, at 4:11 PM, S. Andreason wrote:

> Hi,
>
> The GS readings here have been up for at least a month.
> Looking back in my logs,
> 2006.Feb was 34-36 with no filters and everything off. "PUD baseline."
> at which time I had 4 filters installed at key locations of noisy
> equipment, (like 2 for the computer, mostly off of course). Any more
> than that and the GS would go up.
>
> next record (of GS) is Aug.26, at which time I suspected something
> "else" was higher.
> GS = 53 to 84 maximum spike, without filters, and 55-68 with the 4
> filters.
>
> I ordered more filters, and 2 days ago tried to find locations that
> would bring down the readings.
> GS = black phase: 47-49 with mains off, and 52-62 on red phase with
> mains off.
> black 54-59 with 4 filters
> adding more 8 filters, with some at the PUD panel, did not lower the
> readings... instead they went up, and we felt worse.
>
> Changes in the area I know of:
> wireless internet 8 miles away, very hot and painful in radius of 2Mi
> from tower,
> it is also noisy in mom's ears, with rash returning, over the last 2
> months.
> (We moved here to get away from towers...) :(
>
> It has also been very dry here. extreme fire danger and all the fires
> in
> WA state have been the news.
>
> Putting on my speculation hat;
> could the lack of ground cause the filters to not work well?
>
> When we get rain, I hope to be able to answer that.
> So nothing spiking in the last 3 days here, in NE WA.
>
> Stewart
> http://www.geocities.com/sandreas41
>
> --
> The safest modification you can make to your cell phone is with a
> hammer.
>
> --
> [hidden email] wrote:
>> Many people have reported, over the past 3 days, that their
>> electrical
>> pollution levels (as seen on oscilloscope or Graham Stetzer meter)
>> are way
>> up. We suppose this is due to the military having all their radar,
>> etc.
>> cranked to the max for the anniversary of 9/11, and hope they turn it
>> down to
>> normal again soon.
>> I'd be interested in hearing from folks in different parts of
>> the USA
>> about their electrical pollution levels and symptoms over the past 3
>> days or so.
>> Regards,
>> Shivani
>> www.LifeEnergies.com
>>
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>